SparkFun Raspberry Pi Build HAT Power Supply (48W)

SparkFun Raspberry Pi Build HAT Power Supply (48W) are designed to power the Build HAT, connected LEGO® Technic™ motors, and Raspberry Pi computer. This power supply is compatible with LEGO Technic motors and sensors included in the LEGO® Education SPIKE™ portfolio. The Raspberry Pi Build HAT power supply (48W) features 100-240VAC (rated) and 96-264VAC (operating) voltage range, 8VDC output voltage, 6A nominal load current, 1.5m 16AWG output cable, and 50Hz/60Hz ±3Hz frequency.

Features

  • Output:
    • 8VDC output voltage
    • 0.01A minimum load current
    • 6A nominal load current
    • 48W maximum power
    • ±5% load regulation
    • ±5% line regulation
    • 200mVp-p ripple and noise
    • Rise time:
      • 100ms maximum to regulatory limits for DC outputs
    • Turn-on delay:
      • 3000ms maximum at nominal input AC voltage and full load
    • Protection:
      • Short circuit protection, overcurrent protection, and overvoltage protection
    • Efficiency:
      • 87.77% minimum (output current from 100%, 75%, 50%, 25%)
    • 1.5m 16AWG output cable
    • Output connector:
      • Barrel connector, 5.5mm × 2.1mm × 11mm, center positive
  • Input:
    • 100-240VAC (rated) and 96-264VAC (operating) voltage range
    • 50Hz/60Hz ±3Hz frequency 
    • 1.2A maximum current
    • 0.1W maximum power consumption (no load)
    • Inrush current:
      • No damage shall occur and the input fuse shall not blow
公開: 2021-11-03 | 更新済み: 2021-11-18