すべての結果 (377)

RFアダプタ - 変換 The ADPMVFK is a 2.4mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.

RFアダプタ - 変換 The ADPMVMK is a 2.4mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.

シグナルコンディショニング A wideband mmWave amplifier in our M-package enabling operation up to 95 GHz in a connectorized form. This amplifier provides typical +19 dBm output power, 11 dB gain making it suitable for driving mmWave mixers.

シグナルコンディショニング A general-purpose broadband MMIC driver amplifier that provides +21 dBm output power suitable for driving a Marki H or L diode mixer at 11-38 GHz and S diode mixer from 15 32 GHz. The amplifier also has excellent return losses and gain flatness.

シグナルコンディショニング A broadband MMIC low noise amplifier that efficiently provides low noise figure and return losses in the 30-60 GHz frequency band. It is designed to provide less than 5 dB noise figure with greater than 10 dB gain at <200 mW DC power consumption.

シグナルコンディショニング A general-purpose broadband MMIC driver amplifier that provides +21 dBm output power suitable for driving a Marki H or L diode mixers at 22-57 GHz and S diode mixer from 25-50 GHz.

シグナルコンディショニング The AMM2-0020UH is a broadband amplifier enabling operation over a 10 MHz to 20 GHz frequency range. The amplifier features a 29 dB flat gain response, +23 dBm saturated output power, excellent return losses, and a low 2.5 dB noise figure.

シグナルコンディショニング A single stage broadband, low phase noise LO driver amplifier designed to provide saturated +21 dBm output power. It uses GaAs HBT technology for low phase noise, and provides industry leading -170 dBc/Hz at 10 kHz offset from carrier frequency.

シグナルコンディショニング The APM-7099 is a broadband distributed, low phase noise driver amplifier designed to provide a saturated +25 dBm output power with low DC power consumption.

アテニュエーター - 相互接続 The ATN03-0040BH is a GaAs MMIC attenuator in an inline connectorized bullet housing package. The ATN03-0040BH provides a nominal 3.5 dB attenuation over a DC to 40 GHz operating range.

アテニュエーター - 相互接続 The ATN06-0040BH is a GaAs MMIC attenuator in an inline connectorized bullet housing package. The ATN06-0040BH provides a nominal 6.5 dB attenuation over a DC to 40 GHz operating range.

アテニュエーター - 相互接続 The ATN10-00110 is a family of precision GaAs MMIC fixed attenuators. These attenuators are an ideal solution for attenuating a signal and they can be used in a wide range of applications.