Laird Newest EMI Filters / EMI Suppression
Types of EMI Filters / EMI Suppression
Applied Filters:
Qnity BMI-S-608 Shield Frame
06/10/2024
06/10/2024
One-part shielding solution with a stainless-steel design and without a top-mount cover.
Qnity ReZorb™ S MM Wave Elastomer Absorbers
01/09/2024
01/09/2024
Pure dielectric silicone absorbers with no magnetic properties.
Qnity Eccosorb™ RF-RET Broadband Foam Absorbers
12/22/2023
12/22/2023
Lightweight open-celled reticulated foam absorbers that offer 20dB performance ratings.
Qnity RobZorb® GDS Dispensable Elastomeric Absorbers
10/20/2023
10/20/2023
Designed for optimum performance over an 18GHz to 35GHz frequency range.
Qnity NA12065 Steward™ Nanocrystalline Sheets
10/11/2023
10/11/2023
Provide high-permeability solution for EMI mitigation over a frequency range from 100KHz to 100MHz.
Qnity Eccosorb™ RF-LW Microwave Absorbers
12/22/2022
12/22/2022
Offers high attenuation for cavity-resonance problems and surface-current attenuation.
Qnity Eccosorb™ RF-LB EMI Noise Suppression Absorbers
12/13/2022
12/13/2022
Silicone-based elastomeric absorber with an improved low-frequency filler system.
Qnity CMA0805 Automotive Common Mode Chokes
10/27/2022
10/27/2022
Compact, low 1.20mm profile, ideal for automotive electronics, industrial, & telecom applications.
Qnity Eccosorb™ JCS-Next
10/24/2022
10/24/2022
Dielectrically loaded silicone absorber, targeting high-frequency noise above 30GHz.
Viewing: 1 - 9 of 9
TDK EP21 Flat-Wire Common-Mode Chokes
07/30/2026
07/30/2026
Flat-wire double chokes designed for common-mode EMI filtering.
Niterra AMOBEADS DY Amorphous Ferrite Cores
07/20/2026
07/20/2026
Combines a Co-based amorphous alloy ribbon metal core with a molded exterior resin structure.
Spectrum Control Resin Sealed Bolt-In EMI Filters
07/16/2026
07/16/2026
Designed for quick installation in tapped or through-holes using the included nut and lock washer.
Vishay ICM High-Current SMD Common-Mode Chokes
07/02/2026
07/02/2026
Built with a wirewound ferrite construction in a compact package.
3M AB3000 EMI Absorbers
06/15/2026
06/15/2026
Magnetic EMI absorbers for near-field applications from 1GHz to 10GHz.
Würth Elektronik High-Voltage Common Mode Chokes
06/05/2026
06/05/2026
High-voltage common mode chokes for automotive and power line EMI suppression.
Bourns MH1608A High-Current Chip Ferrite Beads
06/01/2026
06/01/2026
Features a compact size, low profile, and low DCR, along with a rated current of up to 5A.
Bourns MH3261T High-Current Chip Ferrite Beads
05/29/2026
05/29/2026
Features a compact size, low profile, and low DC resistance with a rated current of up to 12A.
Würth Elektronik Nanocrystalline Common Mode Power Line Chokes
05/26/2026
05/26/2026
Has a nanocrystalline core that exhibits a permeability about 10x higher than ferrite cores.
TDK MAF0603GW Noise-Suppression Filters
04/02/2026
04/02/2026
Measures only 0.6mm x 0.3mm x 0.3mm (L x W x H), ideal for use in small consumer devices.
Vishay ILHB Automotive Multilayer Chip Ferrite Beads
03/26/2026
03/26/2026
Designed for effective noise suppression in compact electronic circuits.
Würth Elektronik NanoCrystalline WE-FNCS EMI Shielding Products
03/24/2026
03/24/2026
Delivers advanced EMI shielding for low- to medium-frequency applications.
Pulse Electronics AEC-Q200 CAN/CAN-FD Signal Magnetics
03/24/2026
03/24/2026
Robust construction for vibration and shock resistance with wide interface coverage up to ≤10Mbps.
Fair-Rite 61 Material™ Wireless Charging Ferrite Plates
03/18/2026
03/18/2026
Designed to improve the efficiency of wireless power transfer (WPT) systems.
Fair-Rite 96 Material™ Wireless Charging Ferrite Plates
03/18/2026
03/18/2026
Offers a recommended system power of 5000VA to 16,000VA and a maximum plate thickness of 8mm.
KEMET High-Performance Common Mode Coils
02/24/2026
02/24/2026
Designed with nanocrystalline metal for SCFx series and Mn-Zn Ferrite cores for SCTx series.
Fair-Rite Oval Ferrite Snap-It® Cores
01/20/2026
01/20/2026
Enables two cables to be run side-by-side, can also be used as filters in inductive circuits.
TDK ACM12V-TL05 Common Mode Choke
01/20/2026
01/20/2026
AEC‑Q200‑qualified common-mode choke designed for automotive DC power lines.
TDK B82722V6 HV Common-Mode Chokes
01/19/2026
01/19/2026
Current-compensated ring core double chokes with a maximum voltage rating of 1250VDC.
Vacuumschmelze (VAC) VACOCOIL Common Mode Chokes (CMCs)
12/30/2025
12/30/2025
Patented VACOCOIL technology offers solution for winding of high-power CMC (>50A load currents).
Fair-Rite Multi-Aperture Cores
12/22/2025
12/22/2025
Used in suppression applications and in balun (balance-unbalance) and other broadband transformers.
TE Connectivity RE100 Series SMD Common Mode Chokes
12/05/2025
12/05/2025
Designed for 250V applications and effective integration into automated manufacturing processes.
Bourns CM4030 Common Mode Chokes
12/01/2025
12/01/2025
Offer an inductance range from 2.90mH to 8.90mH and a current range from 10A to 25A.
TE Connectivity RT Series Ferrite Core Chokes
11/05/2025
11/05/2025
Features ferrite core technology, up to 600VAC/DC ratings, and a 6A to 85A current range.
Panasonic EMA0600003B0 FineX Transparent Conductive Film
10/28/2025
10/28/2025
Provides transparent electromagnetic wave shielding and is available in a roll format with OCA.
Viewing: 1 - 25 of 138