Signal Conditioning The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.

Signal Conditioning The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.

Signal Conditioning This general purpose high pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during up-conversion or for removing spurious interference and noise.

Signal Conditioning The HLM-40 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 15dBm.

Signal Conditioning The MDPX-0305 is a broadband passive MMIC diplexer, a combination high pass and loss pass filter, capable of multiplexing low frequency DC to 3 GHz and high frequency 10 to 26.5 GHz signals.

Signal Conditioning The MDPX-0609 is a broadband passive MMIC diplexer, a combination high pass and loss pass filter, capable of multiplexing low frequency DC to 6 GHz and high frequency 9 to 26.5 GHz signals.

Signal Conditioning This equalizer provides positive slope from DC to 40 GHz with a DC attenuation value of 10dB and a 50-ohm match maintained over the entire operating range.

Signal Conditioning This bandpass filter is an ideal solution for small form factor, high rejection filtering; featuring a 14.17-17.83 GHz 1 dBc passband, 3.1 dB center frequency insertion loss and 17 dB return loss. Available in a connectorized bullet housing.

Signal Conditioning The MFBC-00008M family of passive MMIC bandpass filters are an ideal solution for mmWave, high rejection filtering. The MFBC-00008M is available as a connectorized module.

Signal Conditioning The MFBC-00017M family of passive MMIC bandpass filters are an ideal solution for mmWave, high rejection filtering. The MFBC-00017M is available as a connectorized module.

Signal Conditioning The MFBC-00019M family of passive MMIC bandpass filters are an ideal solution for mmWave, high rejection filtering. Marki employs unique packaging techniques to provide optimal performance in a convenient connectorized module.

Signal Conditioning This bandpass filter is an ideal solution for small form factor, high rejection filtering; featuring a 1.56-6.67 GHz 1 dBc passband, 1.3 dB center frequency insertion loss and 27 dB return loss. Available in a connectorized bullet housing.