SparkFun SparkFun Accessories

Results: 944
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (JPY) Filter the results in the table by unit price based on your quantity.
Qty. RoHS ECAD Model Product
Type
SparkFun SparkFun Accessories This is similar to other 16x2 character LCDs that you've seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any color you want by controlling the three ba
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories The LCD-144-G2(GFX) is a compact and cost effective display module using the latest state of the art LCD (TFT) technology with an embedded GOLDELOX-GFX2 graphics processor that delivers stand-alone functionality to any project. Powerful graph Non-Stocked
Min.: 1
Mult.: 1

Modules
SparkFun SparkFun Accessories A staple for the electrical engineer. I can't tell you how many times I've been one clip short! Note: Sold as a single unit. Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories PCB mount clip to hold a AA battery. Sold in single units you'll need two. These work great for small low power applications that need a battery to run. Low cost and easy to use!Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

Battery Holders
SparkFun SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed. This is for the female housing. Be Non-Stocked
Min.: 1
Mult.: 1

Connectors
SparkFun SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end bare cable on the opposite end.Dimensions: 100mm lengthDocuments:JST connector
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

Wire & Cable Jumper Wire
SparkFun SparkFun Accessories This is a very simple but handy 2" square double sided perf board. Standard 0.1" spacing with a 4-40 (3mm) holes for mounting. Great for quickly prototyping stackable circuits. Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These are standard screws with 2-56 thread and 3/8" long recommended for the small button pad sets. Can be used with a 2-56 nut.Sold in single units. Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below.Sold in single units. Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control Non-Stocked
Min.: 1
Mult.: 1

Battery Holders
SparkFun SparkFun Accessories This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220 TO-218 TO-247 and Multiwatt packages - which means it's a great fit for the STA540 L298N and all of our T-220 package voltage regulators. Non-Stocked
Min.: 1
Mult.: 1

Heat Sinks
SparkFun SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

Wire & Cable Jumper Wire
SparkFun SparkFun Accessories This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire it's better for higher current applications.Dimensions: 6" lengthDocuments:Datasheet
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun SparkFun Accessories This is a 10-pin header with 2mm pitch that mates with our XBee socket. It can be used for making 'dummy XBees' or anything else you want!Note: This item is sold singly not in pairs.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. Sold as individuals. Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. Each standoff has an outer diameter of 6mm.Sold in packs of 10. Check below for matching sc Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a 33 meter roll of polyimide tape. This tape is a fantastic insulator like electrical tape but it can withstand temperatures as high as 258 C (496 F). It also provides good resistance to corrosion and the silicone adhesive holds tight thr Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a wire assembly terminated with a 8-pin JST-SH connector. Great for jumping from board to board or just about anything else. One end is terminated with a JST-SH connector and the other end is tinned bare wire leads.Note: The color of these wi Non-Stocked
Min.: 1
Mult.: 1

Cables
SparkFun SparkFun Accessories This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control Non-Stocked
Min.: 1
Mult.: 1

Battery Holders
SparkFun SparkFun Accessories Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 6-Pin male header.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 10-Pin male header.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1