SparkFun Electronics SparkFunアクセサリ

SparkFunアクセサリ These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc. Cables come in red/black pairs.Dimensions: 36" Long

SparkFunアクセサリ Keypads are very handy input devices but who wants to tie up seven GPIO pins wire up a handful of pull-up resistors and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun Qwiic Keypad comes fully assembl

SparkFunアクセサリ Big Red Box Enclosure

SparkFunアクセサリ The AH1815 is an integrated Hall-Effect non-latched sensor. That s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely but can be

SparkFunアクセサリ Soldering Iron - 60W (Adjustable Temp)

SparkFunアクセサリ This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from 20 cm to 88 cm long. Each ANT500 is constructed of stainless steel and features an SMA male connector rotating shaft and a

SparkFunアクセサリ These are 12" long cables terminated with banana plugs. Pretty standard right? Wrong! These right angle banana plugs were specifically made to be great low profile matches to the contacts on the boards in the micro:bit and gator:bit ecosystems. Thi

SparkFunアクセサリ This is a 5-pin JST-ZHR cable that's terminated with breadboard breadboard compatible male pins. It's the same cable that comes with our SPS30 Particulate Matter Sensor and is a great spare if you need one or if you happen to need to connect to a dev

SparkFunアクセサリ Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. Th

SparkFunアクセサリ RGB LED Breakout WS2812B

SparkFunアクセサリ These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight

SparkFunアクセサリ This little round on/off toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It'll also look pretty slick in your project.