SparkFun SparkFun Accessories

Results: 944
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (JPY) Filter the results in the table by unit price based on your quantity.
Qty. RoHS ECAD Model Product
Type
SparkFun SparkFun Accessories So much power and light from such a small package. This 5 pack of "Warm" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power w 16In Stock
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Accessories Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards but are actually the much smaller JST-SH type. 17In Stock
Min.: 1
Mult.: 1
Connectors
SparkFun SparkFun Accessories 2x5 Pin Shrouded Header 69In Stock
Min.: 1
Mult.: 1

Connectors Headers & Wire Housings
SparkFun SparkFun Accessories Heat Sink Compound 130In Stock
Min.: 1
Mult.: 1
Heat Sink Compounds
SparkFun SparkFun Accessories 2x3 Pin Shrouded Header 31In Stock
Min.: 1
Mult.: 1

Connectors Headers & Wire Housings
SparkFun SparkFun Accessories Stackable Header 2x23 Pin Female 167In Stock
Min.: 1
Mult.: 1

Connectors Headers & Wire Housings
SparkFun SparkFun Accessories This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet 50In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
Datasheet
54In Stock
Min.: 1
Mult.: 1

Connectors Feather Stackable Header Kit
SparkFun SparkFun Accessories Soldering Iron Stand 4In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide 3In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector. 6In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA. 77In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas. 93In Stock
Min.: 1
Mult.: 1

Cables
SparkFun SparkFun Accessories This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
Datasheet
36In Stock
Min.: 1
Mult.: 1

Cables U.FL Mini Coax Cable - 200 mm
SparkFun SparkFun Accessories USB 2.0 type A to micro USB 5-pin. This is a new smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Works great wi 4In Stock
Min.: 1
Mult.: 1
Cables
SparkFun SparkFun Accessories This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your
Datasheet
18In Stock
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Accessories This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces. This is not a true piezoelectric speaker but behaves similarly. Instead of a piezoelectric crystal t 19In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a very simple clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC f 30In Stock
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht 22In Stock
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Accessories PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e 173In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Huge 10mm through-hole LEDs. Mood-light an entire wall!Features:3.0-3.4VDC Forward Voltage80mA Forward Current30 degree viewing angle16 000-20 000 MCD outputDocuments:DatasheetLED Tutorial 8In Stock
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Accessories For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
Datasheet
Lead-Time 2 Weeks
Min.: 1
Mult.: 1

Displays 7-Segment Display
SparkFun SparkFun Accessories A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm and has two mounting holes on top.Dimensions: 9.5mm x 45mmDocuments:Datasheet (C3031N-1A2-B10K-GP) 31In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is pe 4In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in
Datasheet
25In Stock
Min.: 1
Mult.: 1

Antennas Flexible GNSS Antenna - U.FL