SparkFun Accessories

Results: 944
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (JPY) Filter the results in the table by unit price based on your quantity.
Qty. RoHS ECAD Model Product
Type
SparkFun SparkFun Accessories DC Barrel Power Jack Connector SMD
Datasheet
92In Stock
Min.: 1
Mult.: 1

Connectors
SparkFun SparkFun Accessories Stackable Header 3 Pin, Female 0.1in 91In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These are simple 6-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.
Datasheet
14In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Piezo Element 108In Stock
Min.: 1
Mult.: 1

Accessories Audio Indicators & Alerts
SparkFun SparkFun Accessories Mini Diagonal Cutters. These are great little cutters! A must have for clipping leads and extra solder tails. 4" long. 19In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories We don't say this lightly: this might be the best solder on the market! There we said it. This "Special Blend" wasn't just picked from a catalog; it is the result of a quest to find the perfect alloy for our own production lines here at SparkFun. Af 3In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories USB 2.0 type A to micro USB 5-pin. This is a new smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Works great wi 4In Stock
Min.: 1
Mult.: 1
Cables
SparkFun SparkFun Accessories This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your
Datasheet
18In Stock
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Accessories This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces. This is not a true piezoelectric speaker but behaves similarly. Instead of a piezoelectric crystal t 19In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a very simple clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC f 30In Stock
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht 22In Stock
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Accessories PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e 173In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Huge 10mm through-hole LEDs. Mood-light an entire wall!Features:3.0-3.4VDC Forward Voltage80mA Forward Current30 degree viewing angle16 000-20 000 MCD outputDocuments:DatasheetLED Tutorial 8In Stock
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Accessories For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
Datasheet
155In Stock
Min.: 1
Mult.: 1

Displays 7-Segment Display
SparkFun SparkFun Accessories A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm and has two mounting holes on top.Dimensions: 9.5mm x 45mmDocuments:Datasheet (C3031N-1A2-B10K-GP) 1In Stock
30Expected 8/24/2026
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is pe 4In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in
Datasheet
28In Stock
Min.: 1
Mult.: 1

Antennas Flexible GNSS Antenna - U.FL
SparkFun SparkFun Accessories DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet
Datasheet
269In Stock
Min.: 1
Mult.: 1

Connectors
SparkFun SparkFun Accessories This is a time saving kit of jumper wires - cut stripped and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2 5 7 10 12 15 17 20 22 25 50 75 100 and 125mm - 10 pieces of each.Inclu 58In Stock
Min.: 1
Mult.: 1

Wire & Cable Jumper Wire
SparkFun SparkFun Accessories Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con 70In Stock
Min.: 1
Mult.: 1
Connectors
SparkFun SparkFun Accessories Jumper - 2 Pin 1,487In Stock
Min.: 1
Mult.: 1

Connectors Headers & Wire Housings
SparkFun SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 14In Stock
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f 12In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Now for all of your coin cell battery surface mount needs the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connects to the positive (+) side of the 27In Stock
Min.: 1
Mult.: 1
Battery Holders Battery Holder - Coin Cell
SparkFun SparkFun Accessories A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safety features. This
Datasheet
2In Stock
Min.: 1
Mult.: 1

Power Supplies Constant Current