すべての結果 (582)

加速度計 Embedded accelerometer; 100 mV/g sensitivity, +/- 5 tolerance; 180 W power consumption, 60 A very low current draw, operates down to 3 VDC; TO5 standard housing, .36" x .38", 304L stainless steel case; weighs 3.2 grams

振動センサ Top exit, 105 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, Equivalent Peak, 5.0 ips (127 mm/sec), 1/4-28 mounting hole (stud included), MIL-C-5015 connector.

センサーケーブル/アクチュエータケーブル MIL-C-5015, 2 socket, IP 68, high temperature (200 degrees C), isolated, blunt cut, twisted pair, braided shield, yellow, Teflon jacket, 32 ft.

振動センサ Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, True Peak (85 C limited), 20 g (196 m/sec2), MIL-C-5015 connector.

振動センサ Compact vibration transmitter, 4-20 mA vibration sensor, 105C; 5g full scale, proportional to acceleration, RMS; ide exit 2-pin MIL-C-5015 connector, 1/4-28 captive mounting bolt

振動センサ Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, RMS, 2.0 ips (50.8 mm/sec), MIL-C-5015 connector.

加速センサーモジュール Top-exit, helicopter accelerometer, 3-pin MIL-C-26482 connector, case isolated, 1/4-28 integral stud, 40 mV/g, +/-5% sensitivity tolerance

振動センサ Top exit, 4-20 mA (+/-5% @ 40 mils) proportional to displacement, peak to peak, 1/4-28 mounting hole (stud included), MIL-C-5015 connector

加速センサーモジュール Top exit, low noise, low frequency (0.1 Hz), MIL-C-5015 connector, 500 mV/g, +/-5% sensitivity tolerance

加速センサーモジュール Top exit, isolated sensor with extended EMI performance, 4 pin M12 connector, M8 integral mounting stud, 100 mV/g, +/-5% sensitivity tolerance

シグナルコンディショニング Factory configured vibration transmitter, IEPE sensor input, 2 x 4-20 mA outputs, supports single and dual output sensors; configuration details: acceleration input, 500 mV/g accelerometer sensitivity, true RMS, velocity output, 1 ips full scale, 1-1

加速センサーモジュール Side exit, low noise floor, microdot connector, high sensitivity, case grounded, 500 mV/g, +/-5% sensitivity tolerance