すべての結果 (1,209)

選択 画像 部品番号 メーカ 説明 データシート 在庫状況 価格: (JPY) 数量に基づき、単価ごとに表の結果をフィルタリングする 数量 RoHS
Marki Microwave シグナルコンディショニング The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
1取寄中
最低: 1
複数: 1

Marki Microwave EVB-MPD4-0218
Marki Microwave RF 開発ツール The EVB-MPD4-0218 is a connectorized evaluation board for the MPD4-0218CSP3 MMIC 2-18 GHz 4-Way power divider/power splitter.
3予想2026/09/18
最低: 1
複数: 1

Marki Microwave RF 増幅器 A high-linearity low noise amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM-8096PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
21取寄中
最低: 1
複数: 1

Marki Microwave アテニュエーター The ATN00-0040PSM is a surface mount GaAs MMIC 0dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
25予想2026/09/11
最低: 1
複数: 1

Marki Microwave アテニュエーター The ATN02-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN02-0070CSP1 features a typical 2.1 dB attenuation with 0.1 dB attenuation flatness and 25 dB return loss across the DC-70 GHz bandwidth.
25予想2026/09/08
最低: 1
複数: 1
Marki Microwave アテニュエーター The ATN03-0040PSM is a surface mount GaAs MMIC 3dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
23予想2026/09/08
最低: 1
複数: 1

Marki Microwave アテニュエーター The ATN10-0040PSM is a surface mount GaAs MMIC 10dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
25予想2026/10/01
最低: 1
複数: 1

Marki Microwave RF 開発ツール
1予想2026/10/19
最低: 1
複数: 1

Marki Microwave RF 開発ツール
1取寄中
最低: 1
複数: 1
Marki Microwave RF 開発ツール The EVB-MPD4-0108 is a connectorized evaluation board for the MPD4-0108CSP2 MMIC 1-8GHz 4-Way power divider/power splitter.
1予想2026/10/23
最低: 1
複数: 1

Marki Microwave RF 開発ツール The EVB-MSW2-1002H is a connectorized evaluation board for the MSW2-1002HLGA surface mount 0.1-20 GHz single-pole double throw (SPDT) switch.
1予想2026/09/03
最低: 1
複数: 1

Marki Microwave イコライザー The MEQ10-14ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 14GHz with DC attenuation options between 3 and 10dB.
25予想2026/10/29
最低: 1
複数: 1

Marki Microwave イコライザー The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 11dB.
25予想2026/11/13
最低: 1
複数: 1

Marki Microwave シグナルコンディショニング The MFBP-00109CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00109CSP3 features a 4.0-6.1GHz 1dBc passband and 2.4dB center frequency insertion loss.
4予想2026/09/23
最低: 1
複数: 1

Marki Microwave シグナルコンディショニング The MFBP-00137PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00137PSM features a 7.7-12.8GHz 1dBc passband and 1.8dB center frequency insertion loss.
12予想2027/02/19
最低: 1
複数: 1

Marki Microwave RF ミキサー The MM1-0115HPSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0115HPSM works well as both an up and down converter through Ku band.
34取寄中
最低: 1
複数: 1

Marki Microwave シグナルコンディショニング The MPD2-00001PSM is a small footprint MMIC 0.4-4 GHz 2-Way Wilkinson power divider/power splitter featuring high 16 dB isolation and low 0.9 dB insertion loss in our compact DFN package.
84取寄中
最低: 1
複数: 1

Marki Microwave シグナルコンディショニング A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
1予想2026/09/01
最低: 1
複数: 1

Marki Microwave シグナルコンディショニング Available in either a connectorized or miniature surface mount package (0.240 inch x 0.150 inch), the DPX-0R5 is a low cost, high performance diplexer. The unique design offers high pass/low pass signal routing/multiplexing with excellent isolation.
5取寄中
最低: 1
複数: 1
Marki Microwave シグナルコンディショニング This general purpose high pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during up-conversion or for removing spurious interference and noise.
1予想2026/09/08
最低: 1
複数: 1

Marki Microwave シグナルコンディショニング The MM1-1857H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
1予想2026/12/15
最低: 1
複数: 1

Marki Microwave シグナルコンディショニング A resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
1予想2027/01/08
最低: 1
複数: 1

Marki Microwave シグナルコンディショニング A surface mount resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
10予想2027/01/11
最低: 1
複数: 1
Marki Microwave シグナルコンディショニング A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
1予想2026/10/02
最低: 1
複数: 1

Marki Microwave シグナルコンディショニング 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
1予想2026/12/24
最低: 1
複数: 1