SparkFun Electronics センサ

結果: 174
選択 画像 部品番号 メーカ 説明 データシート 在庫状況 価格: (JPY) 数量に基づき、単価ごとに表の結果をフィルタリングする 数量 RoHS
SparkFun 加速センサ開発ツール The SparkFun Qwiic ISM330DHCX Six Degrees of Freedom IMU is a standard-sized 1in. by 1in. breakout featuring STMicroelectronics' ISM330DHCX; a high-performance 3D digital accelerometer and 3D digital gyroscope tailored for Industry 4.0. Applications 75在庫
最低: 1
複数: 1
SparkFun 圧力センサ開発ツール The SparkFun Qwiic BMP581 Pressure Sensor is a standard-sized 1in. by 1in. absolute pressure sensor breakout from Bosch Sensortec. The BMP581 boasts exceptional resolution (down to 1/64Pa) and accuracy while maintaining on-chip linearization and tem 82在庫
最低: 1
複数: 1

SparkFun 生体認証センサー This is a 10 pack of Biomedical Sensor Pads disposable electrodes that can be used to measure EEG ECG and EMG levels. these little pads are perfect for short-term monitoring of Neurofeedback and Biofeedback purposes. They are to be used once and ar 337在庫
最低: 1
複数: 1
いいえ
SparkFun 多機能センサー開発ツール The SparkFun Pulse Oximeter and Heart Rate Sensor is an I2C based biometric sensor utilizing two chips from Maxim Integrated: the MAX32664 Biometric Sensor Hub and the MAX30101 Pulse Oximetry and Heart Rate Module. While the latter does all the sens 75在庫
最低: 1
複数: 1
いいえ
SparkFun オプティカルセンサ開発ツール Ambient Light Sensor B/O TEMT6000 125在庫
最低: 1
複数: 1

SparkFun 多機能センサー開発ツール 16 Output I/O Expan B/O SX1509 105在庫
最低: 1
複数: 1

SparkFun 温度センサ開発ツール LilyPad Temperature Sensor 13在庫
最低: 1
複数: 1

SparkFun 加速センサ開発ツール LilyPad ACCLRM ADXL335 7在庫
最低: 1
複数: 1

SparkFun オプティカルセンサ開発ツール The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shining on it. As more light is applied o 18在庫
最低: 1
複数: 1

SparkFun 多機能センサー開発ツール The MyoWare® 2.0 Muscle Sensor is designed to be wearable allowing you to attach biomedical sensor pads directly to the board itself. However there still may be cases where you want to mount the sensor pads away from the board; this is where th 35在庫
最低: 1
複数: 1

SparkFun 多機能センサー開発ツール The MyoWare 2.0 Link Shield is designed to easily connect a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller. The shield provides a 3.5mm TRS jack so that you can use a 3.5mm TRS-to-TRS cable to link the boards together. The MyoWare 2.0 Li 37在庫
最低: 1
複数: 1

SparkFun 多機能センサー開発ツール The MyoWare 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your 5在庫
最低: 1
複数: 1

SparkFun オプティカルセンサ開発ツール This version of the QRE1113 breakout board features a digital output using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available and can be used in both 3.3 34在庫
最低: 1
複数: 1

SparkFun 基板取付型動作および位置センサー This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage 19在庫
最低: 1
複数: 1
SparkFun 圧力センサ開発ツール This is a force sensitive resistor with a round 0.5" diameter sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower the resistance. When no pressure is b 114在庫
最低: 1
複数: 1

SparkFun エアクオリティセンサ This is a simple-to-use compressed natural gas (CNG) sensor suitable for measuring natural gas (mostly methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations ranging from 200 to 10000 ppm.This sensor has a high se 23在庫
最低: 1
複数: 1
SparkFun 温度センサ開発ツール IR Thermometer Eval Board MLX90614 5在庫
最低: 1
複数: 1

SparkFun 加速センサ開発ツール We've been using and selling Analog Devices' ADXL accelerometers for a good while now and now we've found another great part in the series! The ADXL362 is a complete 3-axis MEMS acceleration measurement system that operates at extremely low power co 34在庫
最低: 1
複数: 1

SparkFun 多機能センサー開発ツール RedBot Sensor Line Follower 50在庫
最低: 1
複数: 1

SparkFun 電力センサー開発ツール The INA169 is a high-side current monitor which means that you place a resistor (a shunt resistor ) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a small current based on the 30在庫
最低: 1
複数: 1

SparkFun タッチセンサ開発ツール If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is 30在庫
最低: 1
複数: 1

SparkFun オプティカルセンサ開発ツール RGB Light Sensor - ISL29125 18在庫
最低: 1
複数: 1

SparkFun 温度センサ開発ツール TC Breakout - MAX31855K 7在庫
最低: 1
複数: 1

SparkFun 電力センサー開発ツール Current Sensor Breakout - ACS723 91在庫
最低: 1
複数: 1
SparkFun 磁気センサ開発ツール It's time to start utilizing the superior magnetometer and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor board capable of sensing very small fields 52在庫
最低: 1
複数: 1