SparkFun Accessories These coated flat endmills are perfect for cutting aluminum. They have a ZrN coating which provides a better finish longer lifespan and a superior cut compared to a non-coated endmill.This cutter has a shorter flute length to provide greater rigidi
TOL-15949
SparkFun
1:
¥9,343.1
Non-Stocked
Mouser Part #
474-TOL-15949
SparkFun
SparkFun Accessories These coated flat endmills are perfect for cutting aluminum. They have a ZrN coating which provides a better finish longer lifespan and a superior cut compared to a non-coated endmill.This cutter has a shorter flute length to provide greater rigidi
Non-Stocked
Buy
Min.: 1
Mult.: 1
SparkFun Accessories These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of our cutters are manufactured here in the US and begin life as a blank of
TOL-15950
SparkFun
1:
¥6,228.8
Non-Stocked
Mouser Part #
474-TOL-15950
SparkFun
SparkFun Accessories These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of our cutters are manufactured here in the US and begin life as a blank of
Non-Stocked
Buy
Min.: 1
Mult.: 1
SparkFun Accessories These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of the cutters are manufactured here in the US and begin life as a blank of
TOL-15952
SparkFun
1:
¥8,305
Non-Stocked
Mouser Part #
474-TOL-15952
SparkFun
SparkFun Accessories These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of the cutters are manufactured here in the US and begin life as a blank of
Non-Stocked
Buy
Min.: 1
Mult.: 1
SparkFun Accessories These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of the cutters are manufactured here in the US and begin life as a blank of
TOL-15953
SparkFun
1:
¥6,228.8
Non-Stocked
Mouser Part #
474-TOL-15953
SparkFun
SparkFun Accessories These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of the cutters are manufactured here in the US and begin life as a blank of
Non-Stocked
Buy
Min.: 1
Mult.: 1
SparkFun Accessories Not quite sure which endmills you should get to start working on those projects you've got lined up for your Nomad Pro? Don't worry we have something for you. The Nomad Endmill Starter Pack has a collection of the most popular endmills to get you mi
TOL-15954
SparkFun
1:
¥39,448.8
Non-Stocked
Mouser Part #
474-TOL-15954
SparkFun
SparkFun Accessories Not quite sure which endmills you should get to start working on those projects you've got lined up for your Nomad Pro? Don't worry we have something for you. The Nomad Endmill Starter Pack has a collection of the most popular endmills to get you mi
Non-Stocked
Buy
Min.: 1
Mult.: 1
SparkFun Accessories Just bought your machine and not sure what endmills you should get? The Shapeoko Endmill Starter Pack is for you! It contains a variety of the most popular endmills used on the Shapeoko to get you going on a variety of projects.
TOL-15955
SparkFun
1:
¥40,486.9
Non-Stocked
Mouser Part #
474-TOL-15955
SparkFun
SparkFun Accessories Just bought your machine and not sure what endmills you should get? The Shapeoko Endmill Starter Pack is for you! It contains a variety of the most popular endmills used on the Shapeoko to get you going on a variety of projects.
Non-Stocked
Buy
Min.: 1
Mult.: 1
SparkFun Accessories USB as a power connection standard is common these days but you don't always have a computer on hand so how are you going to power all of your sweet USB devices? How about a high quality switching 'wall wart'? This AC to DC power supply will do 5V a
TOL-16893
SparkFun
1:
¥1,578
Non-Stocked
Mouser Part #
474-TOL-16893
SparkFun
SparkFun Accessories USB as a power connection standard is common these days but you don't always have a computer on hand so how are you going to power all of your sweet USB devices? How about a high quality switching 'wall wart'? This AC to DC power supply will do 5V a
Non-Stocked
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories 2.4GHz ceramic chip antennas. Very small antennas that work nicely with the Nordic ICs. Don't expect these little guys to perform as well as their 2" rubber duck counter parts but then again these will squeeze onto any PCB layout.
WRL-00144
SparkFun
1:
¥581.4
Non-Stocked
Mouser Part #
474-WRL-00144
SparkFun
SparkFun Accessories 2.4GHz ceramic chip antennas. Very small antennas that work nicely with the Nordic ICs. Don't expect these little guys to perform as well as their 2" rubber duck counter parts but then again these will squeeze onto any PCB layout.
Non-Stocked
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories PCB edge mount RP-SMA RF connector. Perfect for prototyping with our RF ICs. This is a standard edge connector. The thickness between pins is 0.063" so that it can slide sideways onto a standard 1.6mm PCB. See the mechanical drawing to create your fo
WRL-00592
SparkFun
1:
¥490
Non-Stocked
Mouser Part #
474-WRL-00592
SparkFun
SparkFun Accessories PCB edge mount RP-SMA RF connector. Perfect for prototyping with our RF ICs. This is a standard edge connector. The thickness between pins is 0.063" so that it can slide sideways onto a standard 1.6mm PCB. See the mechanical drawing to create your fo
Non-Stocked
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories This OBD2 Breakout board is designed to simplify OBD2 device development. The junction blocks allow you to change how signals move between connectors. Install a jumper wire between rows to make "through" connections or jump over to other pins to rear
BOB-25069
SparkFun
1:
¥9,912.8
Non-Stocked
New Product
Mouser Part #
474-BOB-25069
New Product
SparkFun
SparkFun Accessories This OBD2 Breakout board is designed to simplify OBD2 device development. The junction blocks allow you to change how signals move between connectors. Install a jumper wire between rows to make "through" connections or jump over to other pins to rear
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories The SparkFun HSTX PTH Breakout is a simple board designed to work with the HSTX connector on the RP2350 IoT RedBoard and the camera and display connectors on a Raspberry Pi 5. It breaks out all 22 pins used on these connectors to a standard 0.1in.-sp
BOB-28467
SparkFun
1:
¥415.3
Non-Stocked
New Product
Mouser Part #
474-BOB-28467
New Product
SparkFun
SparkFun Accessories The SparkFun HSTX PTH Breakout is a simple board designed to work with the HSTX connector on the RP2350 IoT RedBoard and the camera and display connectors on a Raspberry Pi 5. It breaks out all 22 pins used on these connectors to a standard 0.1in.-sp
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories The SparkFun HSTX to DVI Breakout takes the 22-pin interface found on the HSTX connector on the RP2350 IoT RedBoard and the display connector on a Raspberry Pi 5 and translates it to an HDMI connector for DVI output.The board includes a 22-pin flex c
BOB-28468
SparkFun
1:
¥822.2
Non-Stocked
New Product
Mouser Part #
474-BOB-28468
New Product
SparkFun
SparkFun Accessories The SparkFun HSTX to DVI Breakout takes the 22-pin interface found on the HSTX connector on the RP2350 IoT RedBoard and the display connector on a Raspberry Pi 5 and translates it to an HDMI connector for DVI output.The board includes a 22-pin flex c
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories This is a breakout board for the enigmatic EVQWGD001 by Panasonic. The EVQWGD001 is a roller wheel encoder with a press-to-select switch. It is similar to what you might find on a steering wheel or other circa 2000s automotive input. While the EVQWGD
BOB-29094
SparkFun
1:
¥323.9
Non-Stocked
New Product
Mouser Part #
474-BOB-29094
New Product
SparkFun
SparkFun Accessories This is a breakout board for the enigmatic EVQWGD001 by Panasonic. The EVQWGD001 is a roller wheel encoder with a press-to-select switch. It is similar to what you might find on a steering wheel or other circa 2000s automotive input. While the EVQWGD
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories The SparkFun Male DE9 Breakout is a simple breakout board featuring a male DE9 (commonly referred to as DB9) connector. The board comes with the male DE9 connector and routes all nine of the connector's pins along with two extra ground connections t
BOB-29195
SparkFun
1:
¥656.1
Non-Stocked
New Product
Mouser Part #
474-BOB-29195
New Product
SparkFun
SparkFun Accessories The SparkFun Male DE9 Breakout is a simple breakout board featuring a male DE9 (commonly referred to as DB9) connector. The board comes with the male DE9 connector and routes all nine of the connector's pins along with two extra ground connections t
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories The SparkFun Female DE9 Breakout is a simple breakout board featuring a female DE9 (commonly referred to as DB9) connector. The board comes with the female DE9 connector and breaks all nine pins along with two extra ground connections to a 0.1in.-sp
BOB-29196
SparkFun
1:
¥656.1
Non-Stocked
New Product
Mouser Part #
474-BOB-29196
New Product
SparkFun
SparkFun Accessories The SparkFun Female DE9 Breakout is a simple breakout board featuring a female DE9 (commonly referred to as DB9) connector. The board comes with the female DE9 connector and breaks all nine pins along with two extra ground connections to a 0.1in.-sp
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories The full-color LilyPad Sewable Electronics Kit Guidebook includes step-by-step instructions for creating four interactive projects with the kit and its materials and easy-to-follow diagrams ensure you place components correctly. The manual also incl
BOK-14270
SparkFun
1:
¥1,083
Non-Stocked
Mouser Part #
474-BOK-14270
SparkFun
SparkFun Accessories The full-color LilyPad Sewable Electronics Kit Guidebook includes step-by-step instructions for creating four interactive projects with the kit and its materials and easy-to-follow diagrams ensure you place components correctly. The manual also incl
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories Interface Cable N to RP-SMA Cable - 1m
CAB-14911
SparkFun
1:
¥1,320.5
Non-Stocked
Mouser Part #
474-CAB-14911
SparkFun
SparkFun Accessories Interface Cable N to RP-SMA Cable - 1m
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories Dual 7-Segment Display LED RGB
COM-13999
SparkFun
1:
¥789
Non-Stocked Lead-Time 24 Weeks
Mouser Part #
474-COM-13999
SparkFun
SparkFun Accessories Dual 7-Segment Display LED RGB
Non-Stocked Lead-Time 24 Weeks
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories RGB LED Matrix Panel - 32x32
COM-14646
SparkFun
1:
¥8,055.9
Non-Stocked
Mouser Part #
474-COM-14646
SparkFun
SparkFun Accessories RGB LED Matrix Panel - 32x32
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories The Bourns Absolute Encoder is a digital control knob that provides 128 unique results evenly spaced around a full circle. It is designed as a control panel knob but can be adapted for other uses. This can be a good alternative to using a potentiomet
COM-15036
SparkFun
1:
¥1,867
Non-Stocked
Mouser Part #
474-COM-15036
SparkFun
SparkFun Accessories The Bourns Absolute Encoder is a digital control knob that provides 128 unique results evenly spaced around a full circle. It is designed as a control panel knob but can be adapted for other uses. This can be a good alternative to using a potentiomet
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories The W25Q32FV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space pins and power. This small SMD IC series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code sha
COM-15809
SparkFun
1:
¥323.9
Non-Stocked
Mouser Part #
474-COM-15809
SparkFun
SparkFun Accessories The W25Q32FV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space pins and power. This small SMD IC series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code sha
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories Red Green Blue LED with 220 ohm resistors included.This is the same RGB used in the Teensyduino Tutorials.
COM-28392
SparkFun
1:
¥290.7
Non-Stocked
New Product
Mouser Part #
474-COM-28392
New Product
SparkFun
SparkFun Accessories Red Green Blue LED with 220 ohm resistors included.This is the same RGB used in the Teensyduino Tutorials.
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories The gator:log is the perfect data logging tool for your next experiment. With the automation of the data collection process gone are the days of rushing around with a pen and composition notebook to simultaneously record data and your observations.
DEV-15270
SparkFun
1:
¥2,317.1
Non-Stocked
Mouser Part #
474-DEV-15270
SparkFun
SparkFun Accessories The gator:log is the perfect data logging tool for your next experiment. With the automation of the data collection process gone are the days of rushing around with a pen and composition notebook to simultaneously record data and your observations.
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
SparkFun Accessories This SparkFun Qwiic Pro Micro BoogieBoard was a limited edition version of the Qwiic Pro Micro. We are now out of stock and are not reproducing it. The SparkFun Qwiic Pro Micro BoogieBoard is a Special Edition version of the SparkFun Qwiic Pro Micro
DEV-16442
SparkFun
1:
¥3,934.9
Non-Stocked
Mouser Part #
474-DEV-16442
SparkFun
SparkFun Accessories This SparkFun Qwiic Pro Micro BoogieBoard was a limited edition version of the Qwiic Pro Micro. We are now out of stock and are not reproducing it. The SparkFun Qwiic Pro Micro BoogieBoard is a Special Edition version of the SparkFun Qwiic Pro Micro
Non-Stocked
Buy
Min.: 1
Mult.: 1
No
PCBs & Breadboards Check out the all new Br V2!This board breaks out all the signal pins on the Alchitry headers to 0.1" easy to solder holes.Because the stack height on the new boards is only 4mm the wide version is recommended for most uses so you don't need to worr
DEV-27876
SparkFun
1:
¥2,906.8
Non-Stocked
New Product
Mouser Part #
474-DEV-27876
New Product
SparkFun
PCBs & Breadboards Check out the all new Br V2!This board breaks out all the signal pins on the Alchitry headers to 0.1" easy to solder holes.Because the stack height on the new boards is only 4mm the wide version is recommended for most uses so you don't need to worr
Non-Stocked
Buy
Min.: 1
Mult.: 1
No