SparkFun SparkFun Accessories

Results: 944
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (JPY) Filter the results in the table by unit price based on your quantity.
Qty. RoHS ECAD Model Product
Type
SparkFun SparkFun Accessories These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is an 8-Pin female header.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 6-Pin female header.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of ten. Check below Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control Non-Stocked
Min.: 1
Mult.: 1

Battery Holders
SparkFun SparkFun Accessories PCB mount clip to hold a AAA battery. Sold in single units you'll need two for each battery. These work great for small low power applications that need a battery to run. Low cost and easy to use!Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

Battery Holders
SparkFun SparkFun Accessories This 6 position screw terminal block provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist solder or any other splicing by this method wiring Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Screw-Phillip Head M3 x 12mm Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Adjustable Parts Box
Datasheet
Non-Stocked Lead-Time 14 Weeks
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a Screw Terminal with 3.5mm pitch pins. Comes in 2 3 or 4 positions and have the really cool feature of slide-locking together to form any size you need (4 5 up to 20 without problems). Rated up to 300V @ 10A. Terminal can accept 26 to 16
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

Connectors Screw Terminal - 3.5 mm Pitch, 4-pin
SparkFun SparkFun Accessories Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. These are 6 inch long 26 AWG j
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun SparkFun Accessories This standard 22 AWG hook-up wire is great for general connections between projects (low or high current applications). When you only need two connections to something (like power a button or an indicator LED) this keeps your wiring nice and organi Non-Stocked
Min.: 1
Mult.: 1

Wire & Cable Hook-up Wire
SparkFun SparkFun Accessories This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover as well as an ON/OFF switch that can be used to control power to your project. The 6" ( 150mm) cable has been termin Non-Stocked
Min.: 1
Mult.: 1

Battery Holders Battery Holder - 3 AA
SparkFun SparkFun Accessories This is a 5-pack of the M.2 screws that SparkFun uses with the MicroMod ecosystem.MicroMod uses the common M.2 connector. This is the same connector found on modern motherboards and laptops. There are various locations for the plastic key on th Non-Stocked
Min.: 1
Mult.: 1

Hardware Screw - Phillips Head
SparkFun SparkFun Accessories The RTK Facet Carrying Case helps protect your valuable high-precision GNSS receiver from the harsh elements of the field. Custom slots are molded into the case for the RTK Facet receiver a 915MHz radio + antenna as well as a large open slot for po Non-Stocked
Min.: 1
Mult.: 1
Enclosures Carrying Case
SparkFun SparkFun Accessories Sometimes all you need is a simple but durable carrying case for your parts or projects. The SparkFun Carrying Case is the same one we plan on using some of our newer kits (that you'll see released over the coming weeks and months). This is an inject Non-Stocked
Min.: 1
Mult.: 1
Carrying Cases
SparkFun SparkFun Accessories This is a rugged 10-way 3.5mm-pitch PCB terminal block & 3.5mm-pitch rising clamp screw socket. Ideal for robust I/O and power connections when paired together.Includes: 1x 10-way 3.5mm Rising Clamp Screw Socket 1x 10-way 3.5mm 90 Terminal Block Non-Stocked
Min.: 1
Mult.: 1
Fixed Terminal Blocks Terminals and Sockets
SparkFun SparkFun Accessories Here for all your mechatronic needs is a simple high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60 A standard 3-pin power and control cable is attached and Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a servo adapter cable that allows you to hookup your servo directly to alligator clip connections. On one end you have a shrouded male servo connector and on the other end three 30mm shrouded alligator clips. Alligator clips are a staple ite Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Here is a simple low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60 (at 6V). This small servo comes with a standard 3 pin power and control cable
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
Motors & Accessories Servo Motor
SparkFun SparkFun Accessories These are a pair of DG01D-E hobby motors with encoder with a hall speed encoder. The motor requires a voltage between 4.5-9V has a gearbox ratio of 1:48 and a speed of 140RPM at 4.5V. The voltage between positive and negative is determined according
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
Motors & Accessories Motor with Encoder
SparkFun SparkFun Accessories This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing lightly the resistance changes from infinite to 300k. The sensor itself is thin and flexible but the resistance does not change w Non-Stocked
Min.: 1
Mult.: 1

Sensors
SparkFun SparkFun Accessories The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10 A at one measurement per second.The se Non-Stocked
Min.: 1
Mult.: 1

Sensors
SparkFun SparkFun Accessories Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package it mates well with embedded electronics and can be used with common IR remotes. The TSOP382 is a miniaturized receive Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This tiny little guy is the ALS-PT19 an SMD ambient light sensor that is much smaller than the standard TEMT6000. The ALS-PT19 is capable of taking a voltage supply range of 2.5V to 5.5V and also functions as an NPN transistor. If you are looking fo Non-Stocked
Min.: 1
Mult.: 1

Sensors