SparkFun Accessories Female Headers
PRT-00115
SparkFun
1:
¥323.9
201 In Stock
Mouser Part #
474-PRT-00115
SparkFun
SparkFun Accessories Female Headers
201 In Stock
Buy
Min.: 1
Mult.: 1
Details
Connectors
Headers & Wire Housings
SparkFun Accessories Small heat sink for TO-220 components. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt on type with 2.5W dissipation.
PRT-00121
SparkFun
1:
¥249.2
94 In Stock
Mouser Part #
474-PRT-00121
SparkFun
SparkFun Accessories Small heat sink for TO-220 components. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt on type with 2.5W dissipation.
94 In Stock
Buy
Min.: 1
Mult.: 1
Heat Sinks
SparkFun Accessories Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts
PRT-09536
SparkFun
1:
¥348.8
13 In Stock
50 Expected 11/20/2026
Mouser Part #
474-PRT-09536
SparkFun
SparkFun Accessories Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts
13 In Stock
50 Expected 11/20/2026
Buy
Min.: 1
Mult.: 1
Connectors
SparkFun Accessories This is a wire assembly terminated with a 8-pin JST-SH connector. Great for jumping from board to board or just about anything else. One end is terminated with a JST-SH connector and the other end is tinned bare wire leads.Note: The color of these wi
PRT-10853
SparkFun
1:
¥174.4
36 In Stock
Mouser Part #
474-PRT-10853
SparkFun
SparkFun Accessories This is a wire assembly terminated with a 8-pin JST-SH connector. Great for jumping from board to board or just about anything else. One end is terminated with a JST-SH connector and the other end is tinned bare wire leads.Note: The color of these wi
36 In Stock
Buy
Min.: 1
Mult.: 1
Cables
SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
PRT-15900
SparkFun
1:
¥290.7
9 In Stock
Mouser Part #
474-PRT-15900
SparkFun
SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
9 In Stock
Buy
Min.: 1
Mult.: 1
Details
Connectors
Latch Terminal - 5mm Pitch (4-pin)
SparkFun Accessories This is 50g of high quality Lead-Free Solder Paste the perfect amount to keep around for prototyping and hobby projects that require a bit of SMD soldering. Solder Paste Stenciling is the easiest and quickest way to solder some of the trickier SMD
TOL-12878
SparkFun
1:
¥3,479.8
1 In Stock
5 On Order
Mouser Part #
474-TOL-12878
SparkFun
SparkFun Accessories This is 50g of high quality Lead-Free Solder Paste the perfect amount to keep around for prototyping and hobby projects that require a bit of SMD soldering. Solder Paste Stenciling is the easiest and quickest way to solder some of the trickier SMD
1 In Stock
5 On Order
View Dates
On Order:
2 Expected 11/6/2026
3 Expected 11/11/2026
Factory Lead-Time:
4 Weeks
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories Chip Quik No-Clean Flux Pen - 10mL
TOL-14579
SparkFun
1:
¥1,765.6
44 In Stock
Mouser Part #
474-TOL-14579
SparkFun
SparkFun Accessories Chip Quik No-Clean Flux Pen - 10mL
44 In Stock
Buy
Min.: 1
Mult.: 1
Details
Tools & Supplies
Chip Quik No-Clean Flux Pen
SparkFun Accessories USB 2.0 type A to micro USB 5-pin. This is a new smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Works great wi
CAB-10215
SparkFun
1:
¥1,079.7
3 In Stock
Mouser Part #
474-CAB-10215
SparkFun
SparkFun Accessories USB 2.0 type A to micro USB 5-pin. This is a new smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Works great wi
3 In Stock
Buy
Min.: 1
Mult.: 1
Cables
SparkFun Accessories This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your
COM-07836
SparkFun
1:
¥373.7
9 In Stock
Mouser Part #
474-COM-07836
SparkFun
SparkFun Accessories This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your
9 In Stock
Buy
Min.: 1
Mult.: 1
Optoelectronics
LED
SparkFun Accessories This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces. This is not a true piezoelectric speaker but behaves similarly. Instead of a piezoelectric crystal t
COM-07950
SparkFun
1:
¥415.3
19 In Stock
Mouser Part #
474-COM-07950
SparkFun
SparkFun Accessories This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces. This is not a true piezoelectric speaker but behaves similarly. Instead of a piezoelectric crystal t
19 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories This is a very simple clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC f
COM-09349
SparkFun
1:
¥249.2
30 In Stock
Mouser Part #
474-COM-09349
SparkFun
SparkFun Accessories This is a very simple clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC f
30 In Stock
Buy
Min.: 1
Mult.: 1
Optoelectronics
LED
SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht
COM-10635
SparkFun
1:
¥132.9
9 In Stock
Mouser Part #
474-COM-10635
SparkFun
SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht
9 In Stock
Buy
Min.: 1
Mult.: 1
Optoelectronics
LED
SparkFun Accessories PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e
COM-10803
SparkFun
1:
¥581.4
119 In Stock
Mouser Part #
474-COM-10803
SparkFun
SparkFun Accessories PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e
119 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories Huge 10mm through-hole LEDs. Mood-light an entire wall!Features:3.0-3.4VDC Forward Voltage80mA Forward Current30 degree viewing angle16 000-20 000 MCD outputDocuments:DatasheetLED Tutorial
COM-11118
SparkFun
1:
¥669.4
5 In Stock
Mouser Part #
474-COM-11118
SparkFun
SparkFun Accessories Huge 10mm through-hole LEDs. Mood-light an entire wall!Features:3.0-3.4VDC Forward Voltage80mA Forward Current30 degree viewing angle16 000-20 000 MCD outputDocuments:DatasheetLED Tutorial
5 In Stock
Buy
Min.: 1
Mult.: 1
Optoelectronics
LED
SparkFun Accessories These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount into a 20.2mm diameter hole and are rated up to 16A @ 12v. These simple SPST on-off switches have three terminals the two tha
COM-11155
SparkFun
1:
¥290.7
20 In Stock
Mouser Part #
474-COM-11155
SparkFun
SparkFun Accessories These panel-mounting rocker switches have built-in indicator lights to let you know when your switch is engaged. They mount into a 20.2mm diameter hole and are rated up to 16A @ 12v. These simple SPST on-off switches have three terminals the two tha
20 In Stock
Buy
Min.: 1
Mult.: 1
Switches
SparkFun Accessories A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm and has two mounting holes on top.Dimensions: 9.5mm x 45mmDocuments:Datasheet (C3031N-1A2-B10K-GP)
COM-11621
SparkFun
1:
¥229.2
30 In Stock
Mouser Part #
474-COM-11621
SparkFun
SparkFun Accessories A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm and has two mounting holes on top.Dimensions: 9.5mm x 45mmDocuments:Datasheet (C3031N-1A2-B10K-GP)
30 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories There is something incredibly satisfying about a clean heavy-duty metal interface. This 16mm latching pushbutton with wires is designed to provide the professional rugged feel for your custom panels and interactive projects. Instead of a basic plas
COM-11971
SparkFun
1:
¥1,325.5
5 In Stock
Mouser Part #
474-COM-11971
SparkFun
SparkFun Accessories There is something incredibly satisfying about a clean heavy-duty metal interface. This 16mm latching pushbutton with wires is designed to provide the professional rugged feel for your custom panels and interactive projects. Instead of a basic plas
5 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in
GPS-15246
SparkFun
1:
¥1,166
39 In Stock
Mouser Part #
474-GPS-15246
SparkFun
SparkFun Accessories The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in
39 In Stock
Buy
Min.: 1
Mult.: 1
Details
Antennas
Flexible GNSS Antenna - U.FL
SparkFun Accessories DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet
PRT-00119
SparkFun
1:
¥290.7
178 In Stock
Mouser Part #
474-PRT-00119
SparkFun
SparkFun Accessories DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet
178 In Stock
Buy
Min.: 1
Mult.: 1
Details
Connectors
SparkFun Accessories Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con
PRT-00429
SparkFun
1:
¥373.7
104 In Stock
Mouser Part #
474-PRT-00429
SparkFun
SparkFun Accessories Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con
104 In Stock
Buy
Min.: 1
Mult.: 1
Connectors
SparkFun Accessories Jumper - 2 Pin
PRT-09044
SparkFun
1:
¥79.7
1,097 In Stock
Mouser Part #
474-PRT-09044
SparkFun
SparkFun Accessories Jumper - 2 Pin
1,097 In Stock
Buy
Min.: 1
Mult.: 1
Details
Connectors
Headers & Wire Housings
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of
PRT-09385
SparkFun
1:
¥822.2
7 In Stock
Mouser Part #
474-PRT-09385
SparkFun
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of
7 In Stock
Buy
Min.: 1
Mult.: 1
Wire & Cable
Jumper Wire
SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f
PRT-10927
SparkFun
1:
¥622.9
4 In Stock
Mouser Part #
474-PRT-10927
SparkFun
SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f
4 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories Now for all of your coin cell battery surface mount needs the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connects to the positive (+) side of the
PRT-11892
SparkFun
1:
¥207.6
8 In Stock
Mouser Part #
474-PRT-11892
SparkFun
SparkFun Accessories Now for all of your coin cell battery surface mount needs the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connects to the positive (+) side of the
8 In Stock
Buy
Min.: 1
Mult.: 1
Battery Holders
Battery Holder - Coin Cell
SparkFun Accessories It's like an Xacto knife only better. We use these extensively when working with PCBs. These small knives work well for cutting traces scraping ground pours and guiding hair-like wires into their proper place. Excel knife comes with aluminum handl
TOL-09200
SparkFun
1:
¥622.9
39 In Stock
Mouser Part #
474-TOL-09200
SparkFun
SparkFun Accessories It's like an Xacto knife only better. We use these extensively when working with PCBs. These small knives work well for cutting traces scraping ground pours and guiding hair-like wires into their proper place. Excel knife comes with aluminum handl
39 In Stock
Buy
Min.: 1
Mult.: 1