アクセサリ

SparkFunアクセサリ These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers.This is a 6-Pin female header.Documents:Datasheet

SparkFunアクセサリ You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm

Tinkerforgeのアクセサリ RGB LED Button Bricklet: Push button with built-in RGB LED

SparkFunアクセサリ These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight

SparkFunアクセサリ These are small rare earth magnets - 0.25" cubed. Composed of Neodymium/Iron/Boron (NdFeB) these magnets are curiously strong and make for a great way to attach tools to a metal workbench hold small children to a fridge and as a trigger for reed s

SparkFunアクセサリ This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in pop-out feature that makes changing the battery easy. The feet of the holder have a small hole that allow it to be sewn without modification.

SparkFunアクセサリ This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying

SparkFunアクセサリ Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board you know how valuable these are! Number of pins include: 8 14 16 18 28 and 40.This is a 300mil wide 8-pin socket.

SparkFunアクセサリ This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug 1 female plug plus pins to connect them both. The pins crimp to your cable

SparkFunアクセサリ This is a super small 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the need arises.

SparkFunアクセサリ Flex Sensor 4.5"

SparkFunアクセサリ This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector center positive. This cable allows the user to use a USB port on a computer laptop or on our cigarette power supply to provide our development boards with 5V.The US