TEQ 40-4811WIR

TRACO Power
495-TEQ40-4811WIR
TEQ 40-4811WIR

メーカ:

詳細:
DC/DCコンバータ - シャーシマウント 18-75Vin 5Vout 8A 40W Iso railway

ECADモデル:
無料のライブラリローダーをダウンロードし、お使いのECADツール用にこのファイルを変換してください。ECADモデルの詳細について

在庫状況

在庫:
6 20 日内に出荷可能
最小: 1   倍数: 1
ユニット価格:
¥-
合計 額:
¥-
EST関税:
この製品は配送無料

価格 (JPY)

数量 ユニット価格
合計 額
¥29,913.6 ¥29,914
¥28,331.2 ¥283,312
¥27,723.2 ¥693,080
¥27,270.4 ¥1,363,520
100 見積り

製品属性 属性値 属性の選択
TRACO Power
製品カテゴリー: DC/DCコンバータ - シャーシマウント
RoHS:  
Isolated
1 Output
40 W
48 V
18 V
75 V
5 V
8 A
3 kV
103 mm
57.2 mm
26.1 mm
Industrial
TEQ-40WIR
ブランド: TRACO Power
組立国: Not Available
拡散国: Not Available
原産国: TW
入力電圧: 18 V to 75 V
最高動作温度: + 92 C
最低動作温度: - 40 C
取り付け様式: Chassis
パッケージ化: Bulk
製品: Isolated
製品タイプ: Isolated DC-DC Converters
工場パックの数量: 1
サブカテゴリ: DC-DC Converters
単位重量: 129 g
製品が見つかりました:
類似製品を表示するには、チェックボックスを1つ以上選択します
このカテゴリーの類似製品を表示するには、上記のチェックボックスを1つ以上選択してください。
選択した属性: 0

JPHTS:
850440090
CNHTS:
8504409999
CAHTS:
8504409035
USHTS:
8504409580
TARIC:
8504409590
ECCN:
EAR99

TEQ-40WIR Ruggedized 40W DC/DC Converters

TRACO Power TEQ-40WIR Ruggedized 40W DC/DCC Converters are EN 50155 approved for railway and transit applications as well as industrial requirements where a robust DC/DC power source is required. These 40W isolated DC/DC converters deliver up to 91% efficiency while providing protection against short circuits, overvoltage, and overtemperature. This series is chassis mountable and provides increased EMC immunity against surge, burst, radiated, and conducted disturbances. These TRACO Power units are encased in a rugged metal chassis with a heatsink construction for a high level of thermal performance and a full output power operating temperature range of up to +83°C with natural convection cooling (+92°C with power derating). These converters have an ultra-wide 4:1 input voltage ranges with output ratings of 5VDC at 8000mA, 12VDC at 3330mA, ±12VDC at 1670mA, 15VDC at 2670mA, ±15VDC at 1330mA, 24VDC at 1670mA, and ±24VDC at 830mA.

Railway & Transit Ruggedized DC/DC Converters

TRACO Power Railway and Transit DC/DC Converters are qualified to EN 50155 and EN 61373 standards as well as UL 60950-1 approved. These converters are additionally certified to IEC/EN/UL 60950-1, and several product families in the TEQ series also carry UL 508 certification for demanding Industrial requirements. The product offering covers 3W to 300W, with PCB-mount units from 3W to 240W and chassis-mount types covering 20W to 300W. These converters offer continuous operational input ranges that exceed the defined input voltage ranges of EN 50155. The DC/DC converters have galvanic isolation up to 2250VDC (input-to-output or input-to-the-case).