すべての結果 (1,698)

SparkFunアクセサリ Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp

SparkFunアクセサリ These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as

SparkFunアクセサリ This is your basic tube of unleaded (Pb-free) solder with a no clean water soluble resin core. 0.031" gauge and 15 grams. Mix: 96.5% tin / 3.0% silver / 0.5% copper

SparkFunアクセサリ PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas.

SparkFunアクセサリ Unlock the hidden potential of your motherboard s USB headers. This 6-foot extension cable features a 4-pin female header on one end and a panel-mountable USB-A connector on the other allowing you to place a standard USB port exactly where you nee

SparkFunアクセサリ This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really well). This button is great for user input on a PCB or a good big reset button on a breadboard. Breadboard friend

SparkFunアクセサリ This simple on-off switch is rated for 20A at 12V but who cares about all that it looks way awesome. These toggle switches come with those missile switch covers that make your project look like something out of a spy movie. They're also a great safe

SparkFunアクセサリ Amphenol FCI Clinchr Conn. (3 POS,F)

SparkFunアクセサリ Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts

SparkFunアクセサリ Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SparkFunアクセサリ You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm

SparkFunアクセサリ USB is being implemented as a power connection standard more and more these days but you don't always have a computer on hand so how are you going to power all of your sweet USB devices? How about a high quality switching 'wall wart'? This AC to DC