|
|
温度センサ開発ツール It's time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating in essence a low resolution thermal imaging camera. With this breakout you can detect surface
- SEN-14843
- SparkFun
-
1:
¥11,410
-
42在庫
|
Mouser 部品番号
474-SEN-14843
|
SparkFun
|
温度センサ開発ツール It's time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating in essence a low resolution thermal imaging camera. With this breakout you can detect surface
|
|
42在庫
|
|
最低： 1
複数： 1
|
いいえ
|
|
|
|
ディスプレー開発ツール The SparkFun SerLCD is an AVR-based serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by
- LCD-16398
- SparkFun
-
1:
¥7,705
-
230在庫
|
Mouser 部品番号
474-LCD-16398
|
SparkFun
|
ディスプレー開発ツール The SparkFun SerLCD is an AVR-based serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by
|
|
230在庫
|
|
最低： 1
複数： 1
|
|
|
|
|
ディスプレー開発ツール The SparkFun SerLCD is an AVR-based serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by
- LCD-16396
- SparkFun
-
1:
¥5,833.8
-
40在庫
|
Mouser 部品番号
474-LCD-16396
|
SparkFun
|
ディスプレー開発ツール The SparkFun SerLCD is an AVR-based serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by
|
|
40在庫
|
|
最低： 1
複数： 1
|
|
|
|
|
ディスプレー開発ツール The SparkFun SerLCD is an AVR-based serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 RGB on Black Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by
- LCD-16397
- SparkFun
-
1:
¥5,778.4
-
35在庫
|
Mouser 部品番号
474-LCD-16397
|
SparkFun
|
ディスプレー開発ツール The SparkFun SerLCD is an AVR-based serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 RGB on Black Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by
|
|
35在庫
|
|
最低： 1
複数： 1
|
|
|
|
|
オプティカルセンサ開発ツール SparkFun Spectr Sens Breakout AS7263 NIR
- SEN-14351
- SparkFun
-
1:
¥5,533.9
-
35在庫
|
Mouser 部品番号
474-SEN-14351
|
SparkFun
|
オプティカルセンサ開発ツール SparkFun Spectr Sens Breakout AS7263 NIR
|
|
35在庫
|
|
最低： 1
複数： 1
|
|
|
|
|
磁気センサ開発ツール It's time to start utilizing the superior magnetometer and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor board capable of sensing very small fields
- SEN-14571
- SparkFun
-
1:
¥3,253.5
-
21在庫
|
Mouser 部品番号
474-SEN-14571
|
SparkFun
|
磁気センサ開発ツール It's time to start utilizing the superior magnetometer and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor board capable of sensing very small fields
|
|
21在庫
|
|
最低： 1
複数： 1
|
|
|
|
|
温度センサ開発ツール Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array meaning you have a square array of 64 pixels capable of independent temperature detection. It s like having a thermal cam
- SEN-14607
- SparkFun
-
1:
¥8,741.7
-
11在庫
|
Mouser 部品番号
474-SEN-14607
|
SparkFun
|
温度センサ開発ツール Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array meaning you have a square array of 64 pixels capable of independent temperature detection. It s like having a thermal cam
|
|
11在庫
|
|
最低： 1
複数： 1
|
|
|
|
|
温度センサ開発ツール Looking to keep a log of the climate in your greenhouse create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perfect option for you! The SHTC3 is
- SEN-16467
- SparkFun
-
1:
¥2,136.9
-
23在庫
|
Mouser 部品番号
474-SEN-16467
|
SparkFun
|
温度センサ開発ツール Looking to keep a log of the climate in your greenhouse create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perfect option for you! The SHTC3 is
|
|
23在庫
|
|
最低： 1
複数： 1
|
|
|
|
|
オプティカルセンサ開発ツール SparkFun Spectral Sens Breakout AS7262
- SEN-14347
- SparkFun
-
1:
¥4,645.5
-
2在庫
-
4予想2026/06/19
|
Mouser 部品番号
474-SEN-14347
|
SparkFun
|
オプティカルセンサ開発ツール SparkFun Spectral Sens Breakout AS7262
|
|
2在庫
4予想2026/06/19
|
|
最低： 1
複数： 1
|
|
|
|
|
データ変換 IC 開発ツール A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled ADC input to your Qwiic enabled project. These channels can be used as single-ended in
- DEV-15334
- SparkFun
-
1:
¥1,621.9
-
22在庫
|
Mouser 部品番号
474-DEV-15334
|
SparkFun
|
データ変換 IC 開発ツール A lot of the time you just need to add more analog inputs to solve a problem. It happens. The SparkFun Qwiic 12 Bit ADC can provide four channels of I2C controlled ADC input to your Qwiic enabled project. These channels can be used as single-ended in
|
|
22在庫
|
|
最低： 1
複数： 1
|
いいえ
|
|
|
|
Raspberry Pi HAT / アドオンボード The SparkFun Qwiic SHIM for Raspberry Pi is a small easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you to plug directly to the Pi's I2C bus with no soldering required and the thin PCB design
- DEV-15794
- SparkFun
-
1:
¥317.9
-
97在庫
|
Mouser 部品番号
474-DEV-15794
|
SparkFun
|
Raspberry Pi HAT / アドオンボード The SparkFun Qwiic SHIM for Raspberry Pi is a small easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you to plug directly to the Pi's I2C bus with no soldering required and the thin PCB design
|
|
97在庫
|
|
最低： 1
複数： 1
|
いいえ
|
|
|
|
電源管理IC開発ツール The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturizes them adding Qwiic ports for plug and play functionality. Boasting the same 4245 PSOC and 2-channel motor ports as the SCMD th
- ROB-15451
- SparkFun
-
1:
¥3,876.1
-
11在庫
|
Mouser 部品番号
474-ROB-15451
|
SparkFun
|
電源管理IC開発ツール The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturizes them adding Qwiic ports for plug and play functionality. Boasting the same 4245 PSOC and 2-channel motor ports as the SCMD th
|
|
11在庫
|
|
最低： 1
複数： 1
|
いいえ
|
|
|
|
温度センサ開発ツール It's time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating in essence a low resolution thermal imaging camera. With this breakout you can detect surface
- SEN-14844
- SparkFun
-
1:
¥11,410
-
3在庫
|
Mouser 部品番号
474-SEN-14844
|
SparkFun
|
温度センサ開発ツール It's time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating in essence a low resolution thermal imaging camera. With this breakout you can detect surface
|
|
3在庫
|
|
最低： 1
複数： 1
|
いいえ
|
|
|
|
NFC/RFID開発ツール The SparkFun RFID Qwiic Reader is a simple I2C-based RFID breakout board for the ID-3LA ID-12LA and ID-20LA readers. Plug a reader into the headers and use a Qwiic cable. Then scan your 125kHz ID tag and the unique 32-bit ID will be displayed on
- SEN-15191
- SparkFun
-
1:
¥3,830.5
-
3在庫
|
Mouser 部品番号
474-SEN-15191
|
SparkFun
|
NFC/RFID開発ツール The SparkFun RFID Qwiic Reader is a simple I2C-based RFID breakout board for the ID-3LA ID-12LA and ID-20LA readers. Plug a reader into the headers and use a Qwiic cable. Then scan your 125kHz ID tag and the unique 32-bit ID will be displayed on
|
|
3在庫
|
|
最低： 1
複数： 1
|
いいえ
|
|
|
|
距離センサ開発ツール This SparkFun Distance Sensor Breakout uses the VL53L1X next-generation Time-of-Flight (ToF) sensor module to deliver highly accurate measurements at long ranges for its size. Unlike standard IR sensors that rely on reflected light intensity the VL5
- SEN-14722
- SparkFun
-
1:
¥4,881.9
-
2予想2026/04/28
|
Mouser 部品番号
474-SEN-14722
|
SparkFun
|
距離センサ開発ツール This SparkFun Distance Sensor Breakout uses the VL53L1X next-generation Time-of-Flight (ToF) sensor module to deliver highly accurate measurements at long ranges for its size. Unlike standard IR sensors that rely on reflected light intensity the VL5
|
|
2予想2026/04/28
|
|
最低： 1
複数： 1
|
いいえ
|
|
|
|
GNSS / GPS開発ツール SparkFun GPS Break- Out XA1110 (Qwiic)
- GPS-14414
- SparkFun
-
1:
¥5,859.9
-
非在庫リードタイム 1 週間
|
Mouser 部品番号
474-GPS-14414
|
SparkFun
|
GNSS / GPS開発ツール SparkFun GPS Break- Out XA1110 (Qwiic)
|
|
非在庫リードタイム 1 週間
|
|
最低： 1
複数： 1
|
いいえ
|
|
|
|
GNSS / GPS開発ツール With GPS you are able to know where you are where you're going and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dialing in the accuracy on their GPS
- GPS-15005
- SparkFun
-
1:
¥44,001.9
-
N/A
|
Mouser 部品番号
474-GPS-15005
|
SparkFun
|
GNSS / GPS開発ツール With GPS you are able to know where you are where you're going and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dialing in the accuracy on their GPS
|
|
N/A
|
|
最低： 1
複数： 1
|
いいえ
|
|
|
|
NFC/RFID開発ツール The SparkFun RFID Qwiic Kit is a simple yet all-in-one I2C based RFID starting point for the ID-3LA ID-12LA and ID-20LA readers. Simply plug a reader into the headers and use a Qwiic cable to connect to any Qwiic enabled development board then sc
- KIT-15209
- SparkFun
-
1:
¥8,642.3
-
N/A
|
Mouser 部品番号
474-KIT-15209
|
SparkFun
|
NFC/RFID開発ツール The SparkFun RFID Qwiic Kit is a simple yet all-in-one I2C based RFID starting point for the ID-3LA ID-12LA and ID-20LA readers. Simply plug a reader into the headers and use a Qwiic cable to connect to any Qwiic enabled development board then sc
|
|
N/A
|
|
最低： 1
複数： 1
|
いいえ
|
|
日本
