SparkFun Electronics ツールおよび備品

SparkFunアクセサリ Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SparkFunアクセサリ You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm

SparkFunアクセサリ USB is being implemented as a power connection standard more and more these days but you don't always have a computer on hand so how are you going to power all of your sweet USB devices? How about a high quality switching 'wall wart'? This AC to DC

SparkFunアクセサリ Chip Quik No-Clean Flux Pen - 10mL

SparkFunアクセサリ Rocker Switch SPST (right-angle)

SparkFunアクセサリ The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because if it can sense if a surface is white or black.There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the

SparkFunアクセサリ This 1024 pulse per rotation rotary encoder outputs gray code which you can interpret using a microcontroller and find out which direction the shaft is turning and by how much. This allows you to add feedback to motor control systems. Encoders of thi

SparkFunアクセサリ This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount momentary switch with an illuminated blue LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is

SparkFunアクセサリ Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They re satisfyingly clicky reliable up to tens-of-millions of key presses and a standard in gaming and programming keyboards across the globe. This 'blue' version Cher

SparkFunアクセサリ TRRS connectors are the audio-style connectors that you see on some phones MP3 players and development boards. TRRS stands for "Tip Ring Ring Sleeve " which reflects the fact that unlike a standard stereo connector this actually has three condu

SparkFunアクセサリ This is a right-angle 24-pin Molex Mini-Fit Jr. connector commonly used as the power supply connector on ATX motherboards. Two rows of twelve pins are broken out two rows of through-hole male headers. See the datasheet below for pin spacing dime

SparkFunアクセサリ This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.