SparkFun SparkFunアクセサリ

SparkFunアクセサリ These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f

SparkFunアクセサリ The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40 right angle SMD pins. Add this part to your board to create a handy way to swap out micro:bits for p

SparkFunアクセサリ Solder wick coffee and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute but you'd better ask before touching their solder wick.Solder wick is composed of copper threads braided together. Flux is normally ad

SparkFunアクセサリ This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm 1.23mm thick needles and two smaller 39mm 0.67mm thick needles. The eye of each size needle is large enough to easily t

SparkFunアクセサリ This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you to use an antenna/cable that has an outer thread configuration. You should not need this adapter with any of our antennas or

SparkFunアクセサリ There are a lot of devices out there that still communicate over RS232 but we bet your new laptop isn't one of them. Don't worry though we've got you covered. This 6ft converter plugs into your computer's USB port and provides you with a DB-9 RSR23

SparkFunアクセサリ This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button but it lights up blue! So now you can get visual feedback or light up your project. These have a 12mm body and are rated for 50mA. They don't ea

SparkFunアクセサリ This simple on-off switch is rated for 20A at 12V but who cares about all that it looks way awesome. These toggle switches come with those missile switch covers that make your project look like something out of a spy movie. They're also a great safe

SparkFunアクセサリ So much power and light from such a small package. This 5 pack of "Cool" white 3 Watt aluminum backed PCBs is sure to shed a lot of light on any project you add it to. These LEDs act as any other LED except these little guys require much more power w

SparkFunアクセサリ Small heat sink for TO-220 components. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt on type with 2.5W dissipation.

SparkFunアクセサリ This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our shields and breakout boards.Note:** **This item is sold as each not in pairs.

SparkFunアクセサリ Description: How could anyone improve on the clear plastic breadboard. I mean that's pretty sweet right?What if it was red?This translucent red breadboard is probably the coolest looking regular solderless breadboard there is. It has 2 power buses