C&K Switches KSC SMT用密封型タクトスイッチ

C&KスイッチKSCシリーズ密封型タクトスイッチ(SMT用)は、超長寿命スイッチで、集中的な使用に耐えるように設計されており、最大500万サイクル使用できます。シリコンアクチュエータは、スイッチの組み込みを容易にし、力とアクチュエータの硬度に応じたプリトラベルとポストトラベルを可能にします。エレベータやジョイスティックのボタンなど、耐久性を求められる用途に最適なスイッチです。KSCシリーズには、Jベンドタイプとガルウィングタイプがあり、はんだ付けの工程に合わせてお選びいただけます。

特徴

  • Positive tactile feeling
  •  J bend and Gullwing type terminations
  • Various heights
  • IP67 rated except KSC5 (IP50)
  • Momentary action function
  • 1 make contact = SPST, N.O. contact arrangement
  • Reflow solderable
  • Soft, hard, or no actuator

アプリケーション

  • Automotive
  • Medical instruments
  • Industrial electronics
  • Network infrastructure and IT
  • Elevators

仕様

  • Silver
    • 1VA maximum power
    • 20mVDC to 32VDC voltage range
    • 1mA to 50mA current range
    • -40°C to +85°C operating temperature range
  • Gold
    • 0.2VA maximum power
    • 20mVDC to 32VDC voltage range
    • 0.1mA to 10mA current range
    • -40°C to +125°C operating temperature range
  • ≥250VRMS dielectric strength at 50Hz for 1 minute
  • ≤100mΩ contact resistance
  • ≥10MΩ insulation resistance
  • ≤1ms bounce time
  • 2.5mm to 7.7mm height range

機械図面

機械図面 - C&K Switches KSC SMT用密封型タクトスイッチ
View Results ( 12 ) Page
部品番号 説明 作動力 末端様式 長さ 高さ
KSC541J タクタイルスイッチ SPST-NO J LEAD 300g 1.4 N Gull Wing Lead 6.2 mm 6.2 mm 5.2 mm
KSC441 V2 70SH SP DELTA LFS タクタイルスイッチ 2 N Solder Pin 6.2 mm 6.2 mm 5.2 mm
KSC521G ROHS タクタイルスイッチ Gold 160Gf Gullwing 2 N Gull Wing Lead 6.2 mm 6.2 mm 5.6 mm
KSC521J ROHS タクタイルスイッチ Switch Tact Gold 160 Gf J-Lead 2 N J Form Lead 6.2 mm 6.2 mm 5.6 mm
KSC541J ROHS タクタイルスイッチ Switch Tact Gold 300 Gf J-Type 3 N J Form Lead 6.2 mm 6.2 mm 5.6 mm
KSC4TE01 J LFS タクタイルスイッチ 1.6 N J Form Lead
KSC4TE41J LFS タクタイルスイッチ 4 N J Form Lead
KSC141G タクタイルスイッチ SPST-NO G LEAD 300g 1.2 N Gull Wing Lead 6.8 mm 4 mm 2.5 mm
KSC151G タクタイルスイッチ SPST-NO G LEAD 5500g 1.2 N Gull Wing Lead 6.2 mm 6.2 mm 2.5 mm
KSC471GLFS タクタイルスイッチ Tact Gull Wing Lead
公開: 2016-02-17 | 更新済み: 2023-03-29