SparkFun Accessories

Results: 944
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (JPY) Filter the results in the table by unit price based on your quantity.
Qty. RoHS ECAD Model Product
Type
SparkFun SparkFun Accessories This tiny little guy is the ALS-PT19 an SMD ambient light sensor that is much smaller than the standard TEMT6000. The ALS-PT19 is capable of taking a voltage supply range of 2.5V to 5.5V and also functions as an NPN transistor. If you are looking fo Non-Stocked
Min.: 1
Mult.: 1

Sensors
SparkFun SparkFun Accessories Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend p Non-Stocked
Min.: 1
Mult.: 1

Sensors
SparkFun SparkFun Accessories This single disc load cell (sometimes called a strain gauge) can translate up to 50kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the str Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is the main PCB assembly used in the RTK Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! For more information please see t Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK Facet Main Board v13
SparkFun SparkFun Accessories This is the enclosure and various bits needed to replace the housing of an RTK Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK - Facet Housing
SparkFun SparkFun Accessories This is the enclosure and various bits needed to replace the housing of an RTK L-Band Facet. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! For more information please see the disassembly Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK - Facet L-Band Housing
SparkFun SparkFun Accessories This is the main PCB assembly used in the RTK L-Band Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! This board does not include Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK Facet L-Band Main Board v14
SparkFun SparkFun Accessories This is the front display PCB assembly with a new overlay button and a replacement flex cable. This kit is used if the display or exterior button has failed in the RTK Facet or RTK Facet L-Band and is intended for users who need to repair a device. Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK - Facet Display/Button
SparkFun SparkFun Accessories This is the black silicone protective sock that is stretched over the RTK Facet or RTK Facet L-Band and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken devic Non-Stocked
Min.: 1
Mult.: 1
Replacement Parts RTK - Facet Rubber Sock
SparkFun SparkFun Accessories This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder with - recommended for beginners. Mix: 63% Sn / 37% Pb Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a very simple fixed temp quick heating 30W 110/120 VAC soldering iron. We really enjoy using the more expensive irons but if you really need a cheap iron for your tool box this lovely iron is a good choice. This is a low-cost iron and it Non-Stocked
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This analog panel meter measures DC voltage from 0-5 volts with 2.5% accuracy. It has a clear and easy to read scale and an adjustable dial. These come in handy for measuring the output of sensors with 5V ranges. The face of the meter is 45x45mm over
Datasheet
Non-Stocked
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Parts Box LilyPad (Magnetic) Non-Stocked
Min.: 1
Mult.: 1

Tools & Supplies Storage Boxes & Cases
SparkFun SparkFun Accessories This is a high-quality switching 'wall wart' AC to DC 5.1V 2 500mA USB Micro-B wall power supply manufactured specifically for projects that require a higher level of power. This compact USB AC charger is UL and CSA listed and incorporates a highly r Non-Stocked
Min.: 1
Mult.: 1

Power Supplies
SparkFun SparkFun Accessories When you're working with e-textiles you have a tendency to collect a lot of small parts: LilyPad boards bobbins needles...the tools of the trade. Why not pick up a sturdy box to keep your bits and pieces off the floor? This large LilyPad-branded b Non-Stocked
Min.: 1
Mult.: 1

Enclosures Large Parts Box
SparkFun SparkFun Accessories Tenergy T4s intel. Univ Charger Non-Stocked
Min.: 1
Mult.: 1

Powers Automatic Smart Charger
SparkFun SparkFun Accessories This is a high quality switching 'wall wart' AC to DC 5V 2000mA USB Micro-B wall power supply manufactured specifically for SparkFun Electronics. These are switch mode power supplies which mean the output is regulated to 5V and the capable output cur
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

Power Supplies Wall Adapter Power Supply - 5V, 2A (USB Micro-B)
SparkFun SparkFun Accessories These coated flat endmills are perfect for cutting aluminum. They have a ZrN coating which provides a better finish longer lifespan and a superior cut compared to a non-coated endmill.This cutter has a shorter flute length to provide greater rigidi Non-Stocked
Min.: 1
Mult.: 1
CNC Accessories Zrn Coated Flat Stud Cutter - 0.25 in Diameter
SparkFun SparkFun Accessories These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of our cutters are manufactured here in the US and begin life as a blank of Non-Stocked
Min.: 1
Mult.: 1
CNC Accessories Zrn Single Flute - 0.125 in Diameter
SparkFun SparkFun Accessories These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of the cutters are manufactured here in the US and begin life as a blank of Non-Stocked
Min.: 1
Mult.: 1
CNC Accessories Zrn Coated Single Flute - 0.25 in Diameter
SparkFun SparkFun Accessories These flat mills are perfect for roughing or machining flat or prismatic parts.If you've got a Nomad or Shapeoko these are great cutters for cutting plastic and aluminum.All of the cutters are manufactured here in the US and begin life as a blank of Non-Stocked
Min.: 1
Mult.: 1
CNC Accessories Zrn Coated Single Flute - 2 mm Diameter
SparkFun SparkFun Accessories Not quite sure which endmills you should get to start working on those projects you've got lined up for your Nomad Pro? Don't worry we have something for you. The Nomad Endmill Starter Pack has a collection of the most popular endmills to get you mi Non-Stocked
Min.: 1
Mult.: 1
Starter Packs Nomad Endmill Starter Pack
SparkFun SparkFun Accessories Just bought your machine and not sure what endmills you should get? The Shapeoko Endmill Starter Pack is for you! It contains a variety of the most popular endmills used on the Shapeoko to get you going on a variety of projects. Non-Stocked
Min.: 1
Mult.: 1
Starter Packs Shapeoko Endmill Starter Pack
SparkFun SparkFun Accessories USB as a power connection standard is common these days but you don't always have a computer on hand so how are you going to power all of your sweet USB devices? How about a high quality switching 'wall wart'? This AC to DC power supply will do 5V a
Datasheet
Non-Stocked
Min.: 1
Mult.: 1

Powers USB Wall Charger - 5V, 2A
SparkFun SparkFun Accessories Please note these machines are built to order & have an estimated lead time of 10 days before shipping This is the Shapeoko Standard Z-Plus No Router 65mm a desktop 3-axis CNC Machine kit that allows you to create your 2D and 3D designs out of non Non-Stocked
Min.: 1
Mult.: 1
3-Axis CNC Machine Kits Shapeoko Standard Z-Plus No Router 65 mm