Analog Devices Inc. EVAL-ADM3095E評価ボード
Analog Devices EVAL-ADM3095EEBZは、認証済のIEC電磁適合性（EMC）RS-485評価ボードは、レベル4 IEC EMCおよび完全±42V電源障害保護が備わっているADM3095E RS-485トランシーバを評価するように設計されています。EVAL-ADM3095Eボードは、研究所でのテストが済んでおり、認証されています。また、EVAL-ADM3095Eボードは、RS-485 AおよびBバスピンからGNDに、>±30kV人体モデル（HBM）ESD保護を提供することが検証されています。さらに、EVAL-ADM3095Eは、RS-485 A、Bバスピンで±42V AC/DCピークに対する高電圧障害に耐えることができます。
The EVAL-ADM3095E evaluation boards from Analog Devices are designed for easy configuration through jumper connections. The jumper connections enable or disable the RS-485 driver and receiver. Two power supplies may be used to power the EVAL-ADM3095E. One power supply can be used for the VIO logic supply, and one VCC supply can be used for the RS-485 driver/receiver. When powering the board with one power supply, an on-board jumper connects the ADM3095E VIO and VCC pins. Test points are also included for all power and signal lines.
特徴
- Level 4 IEC EMC certified RS-485 evaluation board
- Certified RS-485 A and B bus pin protection, passing
- IEC 61000-4-5 surge protection to ±4kV
- IEC 61000-4-4 EFT protection to ±2kV
- IEC 61000-4-2 ESD protection to
- ±8kV contact discharge
- ±15kV air gap discharge
- Certified IEC 61000-4-6 conducted RF immunity to Level 3 testing (10V/m rms)
- Passes RS-485 A and B bus pins HBM ESD to >±30kV
- Provides A and B bus pin fault protection to ±42V AC/DC peak
- Convenient connections for power supplies and signals through screw terminal blocks
- 1.62V to 5.5V operating voltage range on VIO logic supply
- 3V to 5.5V operating voltage range on VCC
- Easily configurable through jumper connections
- Test points for measuring all signals
Associated Transceivers
Analog Devices Inc. ADM3095E RS-485トランシーバ
完全統合された電磁互換性（EMC）保護RS-485トランシーバです。
公開: 2017-06-02
| 更新済み: 2022-04-14