Analog Devices / Maxim Integrated MAX14692-MAX14693 高精度、調整可能パワーリミッタ
Maxim MAX14692~MAX14693 高精度、調整可能パワーリミッタは、調整可能な過電圧、低電圧、および過電流保護デバイスで、正過電圧および逆電圧フォルトに加え、過電流フォルトからもシステムを保護します。オプションの外付けpチャネルMOSFETと共に使用すると、これらのデバイスは下流回路も最大±60Vの電圧フォルトから保護します。これらのデバイスは、31mΩの低オン抵抗のFETを内蔵しています。起動時、これらのデバイスは、下流デバイスへの入力に大型蓄積コンデンサが使用されたアプリケーションで、出力の大型コンデンサを連続モードで充電するように設計されています。また、これらのデバイスは2段構成の電流制限モードを特長としており、起動後短時間で、電流はそれぞれ、設定された制限の1倍、1.5倍、および2倍に連続的に制限されます。これによって、起動時の大きな負荷に対し、より高速な充電が可能となります。ADI MAX14692-MAX14693 power limiters feature a low, 31mΩ, on-resistance integrated FET. During startup, these devices are designed to charge large capacitances on the output in a continuous mode for applications where large reservoir capacitors are used on the inputs to downstream devices. These devices offer a dual-stage, current-limit mode in which the current is continuously limited to 1.5x or 2x the programmed limit, respectively, for a short time after startup. This feature enables faster charging of large loads during startup.
特徴
- Robust, high-power protection reduces system downtime
- +5.5V to +58V wide input range
- Negative input tolerance to -60V with external pFET
- Low 31mΩ (typ) RON
- Reverse current-blocking protection with external pFET
- Enables fast startup and brownout recovery
- Thermal foldback current-limit protection
- Dual-stage current limiting
- 1.5x startup current (MAX14692)
- 2.0x startup current (MAX14693)
- Flexible design enables reuse and less requalification
- Adjustable OVLO and UVLO thresholds
- Programmable forward current limit from 0.6A to 6A with ±15% accuracy over full temperature range
- Normal and high-voltage enable inputs (EN and HVEN)
- Protected external pFET gate drive
- Saves board space and reduces external BOM count
- 20-pin 5mm x 5mm TQFN package
- Integrated nFET
アプリケーション
- Industrial power systems
- Control and automation
- Motion system drives
- Human machine interfaces
- High-power applications
公開: 2015-01-15
| 更新済み: 2023-04-17
