JAE Electronics MX49 Automotive Grade USB 2.0 Connectors
JAE Electronics MX49 Automotive Grade USB 2.0 Connectors meet the demand for smaller connectors in car navigation systems. The MX49 Series has a reduced height, width, and depth compared to previous automotive connectors, achieving a 48% reduction in volume. MX49 Series is compatible with high-speed signals and has transmission performance that satisfies the USB 2.0 standard. The MX49 Series also features the environmental resistance that is required for an automotive connector. These connectors feature a mechanical lock and twist-resistant structure for the mated connector.
Features
- Achieves a 48% reduction in volume compared to JAE's previous product
- Compatible with USB 2.0 standard transmission
- 2.0mm pitch, 2 rows, 4 positions (2 signal lines, power, ground)
- The board connector is available in DIP type and reflow type
- Different keying versions available for mis-mating prevention (DIP type: 5 versions; reflow type: 4 versions)
- Mechanical lock and twist-resistant structure for a mated connector
- Dual-shield structure with ground terminals for EMI control
- Available as a completed harness to ensure transmission performance reliability
Specifications
- No. of contacts - 4 positions
- AC1000Vrms (applied voltage) per minute (mated condition) dielectric withstanding voltage
- -40°C to +85°C operating temperature
- 100MΩ min. (mated condition) insulation resistance
- 1.6mm applicable board thickness
- Applicable wire (signal line is shielded twisted-pair wire (for harness))
- 70N max. connector insertion force
Applications
- Car navigation
- Car audio
公開: 2014-07-16
| 更新済み: 2022-03-11