Panduit Cable Entry Systems

Panduit Cable Entry Systems offer a safe, organized method to transition cable/hoses through enclosures and electrical equipment, simplifying installation. The system provides strain relief while maintaining IP/NEMA ingress sealing ratings and can manage numerous cables in a very dense space. High-density hole configurations provide up to 80% space savings and feature extra hole locations in the same dense design, allowing for future cabling moves, adds, and changes. These configurations are critical for machine applications that require several cables with limited space. The Panduit Cable Entry Systems handle both unterminated and terminated cables.

Features

Round and rectangular solutions are available
- Up to 80% labor savings and 80% space savings when multiple cables are required to pass into the same enclosure
- One hole/punch can accommodate up to 12x terminated cables and up to 140x unterminated cables
Accommodates terminated and un-terminated cables, prevents re-termination of cables in order to pass through openings
Meets multiple IP/NEMA ingress sealing ratings to accommodate a variety of applications

Circular and rectangular designs are compatible with industry-standard electrical cutout punches to ease installation
Imperial dimensions physically molded into components for easy reference
Strain relief, grommets and sealing membranes prevent cables from over-bending at cable entry points

Specifications

Rectangular cable entry system frames for terminated cables
- Requires the use of CEG grommets to achieve sealing properties
  - Small grommets accommodate 0.08" to 0.47" cable diameters
  - Medium grommets accommodate 0.47" to 0.87" cable diameters
  - Large grommets accommodate 0.87" to 1.18" cable diameters
  - Manufactured from TPE materials
  - 1 to 4 openings
- Integrated strain relief
- Cable grommets available for ASI cables
- Requires 4x user-supplied 10-32 screws and nuts for mounting
- IP54 (NEMA Type 1 and 12) and IP65 (NEMA Type 1, 12, and 4X indoor use only)
- Manufactured from polypropylene and TPE materials
- 2 to 12 openings
- UL 94V-0 flammability rating
- UV resistant
- -30°C to +100°C temperature range
- 2 to 12 openings
Single-opening round cable entry system frames for terminated cables
- Requires the use of CEG grommets to achieve sealing properties
  - Small grommets accommodate 0.08" to 0.47" cable diameters
  - Medium grommets accommodate 0.47" to 0.87" cable diameters
  - Large grommets accommodate 0.87" to 1.18" cable diameters
  - Manufactured from TPE materials
  - 1 to 4 openings
- Split locknut included
- Cable grommets available for ASI cables
- IP65 (NEMA Type 1 and 12)
- Manufactured from polyamide 6 materials
- UL 94V-0 flammability rating
- UV resistant
- -30°C to +100°C temperature range
Four-opening square cable entry system frames for terminated cables
- Installs into a 50.5mm (2") round hole
- Requires the use of CEG grommets to achieve sealing properties
  - Small grommets accommodate 0.08" to 0.47" cable diameters
  - Manufactured from TPE materials
  - 1 to 4 openings
- Integrated strain relief
- Requires 4x user-supplied 10-32 screws and nuts for mounting
- IP65 (NEMA Type 1, 12, and 4X indoor use only)
- Manufactured from polypropylene and TPE materials
- UL 94V-0 flammability rating
- UV resistant
- -30°C to +100°C temperature range

Rectangular cable entry system for un-terminated cables
- Offers a high degree of strain relief
- Snap-in fastening and/or screw-in-place with 4x user-supplied 10-32 screws and nuts
- Snap-in at plate thickness of 0.06" to 0.08" thick
- Identification area suitable for label
- Ports feature an innovative polymer membrane that gives a high-quality fit around cables and a high degree of strain relief
- IP65 (NEMA Type 1 and 12)
- Manufactured from polyamide 6.6 and TPU/EPDM materials
- 10 to 29 openings
- UL 94 HB flammability rating
- UV resistant
- -30°C to +100°C temperature range
Rectangular cable entry membrane plate for un-terminated cables
- Offers a good degree of strain relief
- Requires 4x user-supplied 10-32 screws and nuts for mounting
- IP66 (NEMA Type 12 and 4X indoor use only)
- Manufactured from polypropylene (frame) and TPE (seal)
- 10 to 24 openings
- UL 94V-0 rated frame and UL 94 HB seal
- UV resistant
- -30°C to +70°C temperature range
Rectangular metal cable entry system plates for un-terminated cables
- Aluminum and stainless steel plates are ideal for high-density cabling and the most demanding environments
- Stainless steel version is suitable for application in the food and chemical areas
- Offers a high degree of strain relief
- IP65 (NEMA Type 1 and 12)
- Stainless steel products include integrated fasteners. Aluminum products require user-supplied screws and nuts for mounting.
- Seals are manufactured from NBR / EPDM materials
- -30°C to +90°C temperature range
- 8 to 140 openings
Round cable entry system for un-terminated cables
- Offers high (CESU2) or good (CESUM3) strain relief
- Snap-in fastening or secure in place with a locknut (included)
- Snaps into panel thickness of 0.06" to 0.08"
- IP65 (NEMA Type 1 and 12)
- Manufactured from polyamide 6.6 and NBR/EPDM materials
- 4 to 46 openings
- UL 94 HB flammability rating
- UV resistant
- -30°C to +90°C temperature range