TDK InvenSense TDMデジタル出力が備わったIC-52000低ノイズのマイク
TDK InvenSense IC‐52000は、低ノイズデジタルTDM出力ボトムポートマイクで、小型4mm × 3mm × 1mm表面実装パッケージに格納されています。 このデバイスは、MEMSセンサ、シグナル・コンディショニング、アナログ・デジタル・コンバータ、デシメーションとアンチ‐・エイリアス・フィルタ、電源管理、業界標準の24ビットTDMインターフェイスで構成されています。 TDMインターフェイスを使用すると、多数のICS-52000マイクが可能になり DSPおよびマイクロコントローラといったデジタル・プロセッサに直接接続できるようになり、システムにオーディオ・コーデックを必要としません。 アレイ内のすべてのマイクは、その音響信号を同期してサンプリングし、正確なアレイ処理を可能にします。 IC‐52000は、65dBAの高SNRおよび広い帯域周波数応答が特徴です。 感度公差は±1dBで、システム較正を必要とせずに高性能なマイクアレイが可能です。 IC-52000には、通常動作、およびスタンバイモードの2つの電源状態があります。 このマイクには、ソフト消音解除機能があり、パワーアップ時にポップされることを防止できます。 ICS-52000がデータの出力を開始してからこのボリュームは、256WSクロック・サイクル全体で本格的な出力レベルまでランプアップします。 48Khzサンプリングレートが備わっているこのミュート解除シーケンスは、約5.3msかかります。The ICS‐52000 features a high SNR of 65dBA and a wideband frequency response. The sensitivity tolerance is ±1dB enabling high‐performance microphone arrays without the need for system calibration. The ICS-52000 has two power states: normal operation, and standby mode. The microphone has a soft unmute feature to prevent pops on power-up. From the time that the ICS-52000 starts to output data, the volume will ramp up to the full-scale output level over 256WS clock cycles. With a 48kHz sampling rate, this unmute sequence will take about 5.3ms.
特徴
- Digital TDM Interface with High Precision 24-bit Data
- Supports TDM arrays of up to 16 synchronously sampled channels
- High 65dBA SNR
- -26dB FS Sensitivity
- ±1dB Sensitivity Tolerance
- Wide Frequency Response: 50Hz to 20kHz
- Low Current Consumption: 1.0mA
- High power Supply Rejection: -89dB FS
- 117dB SPL Acoustic Overload Point
- Small 4mm x 3mm x 1mm SMT Package
- Compatible with Sn/Pb and Pb-Free Solder Processes
- RoHS/WEEE Compliant
アプリケーション
- Speech Recognition Arrays
- Smart Televisions
- Teleconferencing Systems
- Gaming Consoles
- Security Systems
- Microphone Arrays
Functional Block Diagram
公開: 2017-06-29
| 更新済み: 2022-03-10
