SparkFun コネクタ

USBコネクタ The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe

専用ケーブル Three pin JST connector with red black and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy this cable will save you 15-20 minutes over making your own

基板間およびメザニンコネクタ These are the surface mount 50 pin 0.5mm Board to Board Double Slot Male Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the underside of the board.These connecto

USBケーブル / IEEE 1394ケーブル You've got the wrong USB cable. It doesn't matter which one you have it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The SparkFun 4-in-1 Multi-USB Cable. The SparkFun 4-in-1 Multi

RFケーブルアセンブリ This is a 10 meter (33 ft) long Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO' style GNSS antenna. It's long enough to connect

RFケーブルアセンブリ This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 1M (39.3in.) long with RG174 housing. The SMA connectors at each end are small enough for most consumer GPS cellular and other RF applications and they use a thread

RFケーブルアセンブリ This RP-SMA to U.FL Cable is commonly used to connect boards with the compact U.FL connector to an enclosure wall. This allows an external antenna to be attached. What makes this unassuming cable special is the slightly longer length of 150mm (compar

RFケーブルアセンブリ This is a 300mm (1 foot) Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO' style GNSS antenna. Able to withstand harsh environment

ヘッダ & ワイヤハウジング This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi Google Coral and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the boa

USBケーブル / IEEE 1394ケーブル A USB A to Micro B cable specifically for use with the micro:bit. It measures 0.3m and handles both power and USB 2.0 data rates.

ヘッダ & ワイヤハウジング This is a 2x5 pin 1.27mm header.

RFケーブルアセンブリ This is a basic RP-SMA (Reverse Polarity Sub-Miniature A) male to female connector cable. Each cable is 10M (393.7in.) long with RG58 housing. The RP-SMA connectors at each end are small enough for most consumer GPS cellular and other RF applicatio