RADSOK® PowerBlok™電線対基板コネクタ

Amphenol Industrial RADSOK® PowerBlok™電線対基板には、プリント基板(PCB)の消費電力要件を満たすように特許取得済のRADSOKコンタクト技術が使用されており、必要なボード実装面積も小さくなります。RADSOK PowerBlokはシングルポイント近卓端子として、垂直または水平嵌合面で提供され、コンポーネント配置の決定が重要な場合に必要な汎用性を提供します。取外可能なロックハウジングが付かされており、厳しい振動環境下で基板との嵌合が損なわれません。

結果: 7
選択 画像 部品番号 メーカ 説明 データシート 在庫状況 価格: (JPY) 数量に基づき、単価ごとに表の結果をフィルタリングする 数量 RoHS ECADモデル 製品タイプ 接合部の性別 定格電流 定格電圧 位置数 取り付け様式 末端様式 間隔 シリーズ パッケージ化 トレードネーム
Amphenol Industrial 電源対基板 2.4MM CABLE APPLIED PIN 100在庫
最低: 1
複数: 1
Power to the Board Pin (Male) 35 A 1 Position Cable Mount / Free Hanging Crimp 2.4 mm RADSOK RADSOK
Amphenol Industrial 電源対基板 3.6MM CABLE APPLIED PIN 37在庫
100予想2026/03/13
最低: 1
複数: 1

Power to the Board Pin (Male) 70 A 1 Position Cable Mount / Free Hanging Crimp 3.6 mm RADSOK RADSOK
Amphenol Industrial 電源対基板 Wire to board, 3.6mm, Socket, Vertical Mating, 9.3mm Height Over Board, Pin Length = 2.50mm, 70amp, solder type PCB, Reel Pack 393在庫
最低: 1
複数: 1
リール: 400

Power to the Board Socket (Female) 70 A 500 V SMD/SMT Press Fit Reel, Cut Tape
Amphenol Industrial 電源対基板 3.6MM BOARD MOUNT RECEPTACLE 1,555在庫
最低: 1
複数: 1
リール: 2,500
Power to the Board Socket (Female) 70 A 1 Position Through Hole Solder 3.6 mm RADSOK Reel, Cut Tape RADSOK
Amphenol Industrial 電源対基板 Wire to board, 3.6mm, Socket, Vertical Mating, 8.7mm Height Over Board, Pin Length = 2.50mm, 70amp, solder type PCB, Reel Pack 850在庫
最低: 1
複数: 1
リール: 400

Power to the Board Socket (Female) 70 A 500 V SMD/SMT Press Fit Reel, Cut Tape
Amphenol Industrial 電源対基板 Wire to board, 3.6mm, Socket, Vertical Mating, 8.7mm Height Over Board, Pin Length = 2.50mm, 70amp, solder type PCB, Standard Pack 在庫なし
最低: 1
複数: 1

Power to the Board Socket (Female) 70 A 500 V SMD/SMT Press Fit Tray
Amphenol Industrial 電源対基板 Wire to board, 3.6mm, Socket, Vertical Mating, 9.3mm Height Over Board, Pin Length = 2.50mm, 70amp, solder type PCB, Standard Pack 在庫なし
最低: 1
複数: 1

Power to the Board Socket (Female) 70 A 500 V SMD/SMT Press Fit Tray